2-3 weeks
Brand: ICPDAS
Model: I-7005 CR
8-channel Thermistor Input and 6-channel DO Module with DCON Protocol.The I-7005 module is used for measuring temperatures using a thermistor. The module supports a wide range of thermistors, including support for user-defined thermistor types, which can be added by specifying the Steinhart coefficients, if necessary, and features individual channel configuration, meaning that each of the eight input channels can be individually configured for di..
1 122,01 zł
2-3 weeks
Brand: ICPDAS
Model: M-7011D CR
1-channel Thermocouple Input Module using the DCON and Modbus Protocols with LED Display. The I-7011 series of modules feature current and voltage input, as well as thermocouple input. The module provides 1-channel Analog Input, 1-channel Digital Input that functions as a 50 Hz event counter, and 2-channel Digital Output that can be used as a high/low alarm. The module also features open wire detection for the thermocouple input, and 3000 VDC int..
1 122,01 zł
2-3 weeks
Brand: ICPDAS
Model: I-7017F CR
8-channel Analog Input Module using the DCON Protocol (Fast Sampling Version). The I-7017 and I-7017F are analog input modules that provide either 8 differential input channels, or 6 differential input channels and 2 singleended input channels selectable via a jumper. The input type includes both voltage and current, and all channels are available for the same input range. An optional external 125 Ω resistor is required for current input. The mod..
1 126,78 zł
2-3 weeks
Brand: ICPDAS
Model: I-7017FC CR
8-channel Current Input Module using the DCON Protocol (fast sampling version). The I-7017C is an 8-channel current input module that is specifically designed to measure current only. Its user-friendly design saves both time and effort when measuring a current thanks to a built-in resistor, meaning that you can now measure current directly. The I-7017RC is an upgraded version of the I-7017C, with the only difference being that the I-7017RC is muc..
1 126,78 zł
2-3 weeks
Brand: ICPDAS
Model: M-7013P CR
1-channel RTD Input Module using the DCON and Modbus Protocols. The I-7013(D) and M-7013P(D) is a 1-channel RTD Input module that is used for measuring temperatures via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module allows 2/3/4-wire RTD connections and features open wire detection. In addition, the I-7013(D) and M-7013P(D) also includes 3000 VDC intra-module isolation and supports lead resistance elimination for 3/4..
1 126,78 zł
2-3 weeks
Brand: ICPDAS
Model: PET-7066 CR
Ethernet I/O Module with 1 Ethernet PoE port and 8 PhotoMOS Relays. The ET-7066/PET-7066 provides 8 form A PhotoMOS relays. It features optical isolation for 3000 Vrms of transient overvoltage protection and doesn’t have channel-to-channel isolation. The power-on value and safe value of PhotoMOS relay are programmable. It can safely be used in applications where hazardous voltages are present.Features:Built-in Web ServerWeb HMISupport for both Mo..
1 126,78 zł
2-3 weeks
Brand: ICPDAS
Model: PISO-725 CR
Industrial PCI Card with 8-ch isolated digital input and 8-ch relay output. The PISO-725 is a 16-channel digital input/output interface board for PCI bus computers. It can be installed in a 5 V PCI slot and supports true "Plug & Play" to automatically obtain I/O resources. The PISO-725 has a single DB-37 connector, and provides 8 electromechanical relay outputs and 8 isolated/non-isolated digital inputs. The digital inputs can be set to eithe..
1 131,56 zł
2-3 weeks
Brand: ICPDAS
Model: PISO-P8R8U CR
Industrial Universal PCI Card with 8 Relay Outputs and 8 Isolated Digital Inputs. The PISO-P8R8U universal PCI card supports 3.3 V/5 V PCI bus while the PISO-P8R8 supports 5 V PCI bus. These cards provide 8-channel optically isolated DI and an 8-channel electromechanical relay output board. These DI channels provide 3750 Vrms isolation protection that allows the input signals to be completely floated so as to prevent ground loops and isolate the ..
1 131,56 zł
2-3 weeks
Brand: ICPDAS
Model: M-7088 CR
8-channel PWM Output and 8-channel High-speed Counter Module using the DCON and Modbus Protocols. The I-7088 provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and cost-effective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to..
1 136,33 zł
5-10 days
Brand: Contemporary Controls
Model: BMT-DO4
I/O BACnet MS/TP Module with 4 digital outputs.For those installations that support a fieldbus solution such as BACnet MS/TP, Contemporary Controls provides solutions for expanding the number of I/O points in the field. These compact cost-effective modules are available with analog and digital inputs and outputs in varying combinations. The BACnet MS/TP module with 4 digital outputs is designed for local switching operations. It is suitable to..
1 145,88 zł
3-4 days
Brand: ADF Web
Model: HD67032-B2-20
Industrial MBus repeater & isolator, master MBus up to 20 slaves, housing type B (wide), DIN rail mount. HD67032M-20 allows to Isolate and Extend a MBus Line, ensuring galvanic isolation between the various MBus branches. HD67032 is a configurable device with Logic Inside and it allow to connect up to 20 MBus Slaves. Repeater is easy to configure thanks to free SW67032 software.Configuration:Thanks to the SW67032 software on your PC you can:D..
1 150,65 zł
2-3 weeks
Brand: ICPDAS
Model: TPD-283U-M1 CR
2.8” Touch HMI device with RS-485, RTC and Ethernet PoE port. TPD 2.8 inch Mx series is a series of tiny touch HMI and designed for building and home automation. TPD 2.8 inch Mx series is equipped with high resolution TFT color touch screen and fits in with regular electrical wall-mount outlet. Besides, it is seamlessly integrated with rich I/O modules and presents beautiful, flexible and user-defined picture frame. In short, it is the best choice t..
1 150,65 zł
