Search

Bare wires made of AlMgSi alloy for overhead power lines. Characteristics:Material: AlMgSi alloy wires type AL3 according to PN-EN 50183Structure of the wire: Wires twisted in coaxial layers, directions of twisting opposite layers, direction of the outer layer should be..

Bare steel and aluminum wires for overhead power lines. Characteristics:Material:Hard aluminum wires according to PN-EN 60889Steel wires type ST1A according to PN-EN 50189Structure of the wire: Single or multi-wire core made of galvanized steel wires, lubricated, subseq..

Aluminum bare wires for overhead power lines. Characteristics:Material: Hard aluminum wires according to PN-EN 60889Structure of the wire: Wires twisted with concentric layers, directions of twisting of adjacent opposing layers, direction of the outer layer should be ri..

Self-supporting power cables with aluminum cores and cross-linked polyethylene insulation, resistant to flame propagation. One and multi-core, rated voltage: 0.6 / 1 kV.Construction:Veins: Aluminum, round, compactedCore insulation: Cross-linked polyethylene, resistant t..

Copper bare wires for overhead power lines. Characteristics:Material: Hard wires according to ZN-PBP-213:1997 from copper Cu-ETP according to PN-EN 1977Explanation of markings:Cable D 4 mm² - ZN-PBP-213: 1997 - Copper single-wire conductor (D) with rated cross-section (..

Fire-resistant safety cables, halogen-free, low-emission, shielded.For use where special protection of people, cultural and material assets is required. It ensures the functioning of warning systems, fire extinguishing, emergency lighting ventilation, smoke dampers and ..

Fire-resistant safety cables, halogen-free with low smoke emission.Halogen-free and fire-proof electric and signal cables are designed for applications where special protection of people, cultural and material assets is required. They ensure the functioning of warning s..

Fire-resistant safety cables, halogen-free with low smoke emission. Halogen-free and fire-proof electric and signal cables are designed for applications where special protection of people, cultural and material assets is required. They ensure the functioning of warning ..

Halogen-free, flame-retardant cables with low smoke emission.Intended for use as power and signaling cables in facilities with stricted fire-fighting requirements (hotels, hospitals, offices, airports, shopping centers, industrial facilities, etc.). Recommended for use ..

Single core cables for permanent installation, low smoke emission and corrosive gases during smoking. ApplicationIn electrical engineering, control cabinets, switching stations, automation devices, as well as in lighting equipment and installations, in facilities with s..

Single core cables for permanent installation, low smoke emission and corrosive gases during smoking. ApplicationIn electrical engineering, control cabinets, switching stations, automation devices, as well as in lighting equipment and installations, in facilities with s..

Single-core cables, uncoated, halogen-free, with low smoke and corrosive gases emission. ApplicationSingle-core, non-corroded cables are suitable in particular in cases where low emissivity of fumes and corrosive gases is required in case of fire. H07Z1-U, R, K cables a..