Search
Search Criteria
Products meeting the search criteria
Shipping 24h
Test for Free!
6 year warranty
Quantity discount
Brand: 3onedata
Model: SW485WA
The SW485WA is an industrial grade bi-directional port-powered 2500V optoisolated RS232 to RS485 converter in a 9 pin format. The SW485WA is an industrial grade bi-directional port-powered 2500V opto-isolated RS232 to RS485 converter in a 9 pin format. It can convert any standard full duplex RS232C port to any two-wire balanced half duplex RS485 port. In simple terms, it will convert any RS232 signal to a RS485 signal and vice versa. The unit is ..
199.89 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7560 CR
Industrial USB to RS-232 Converter. The I-7560/I-7560U provides a Windows serial COM port via it's USB connection and is compatible with new and legacy RS-232 devices. USB Plug-and-Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port settings manually.It also features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND) on it's PC compatible DB-9 male connector. It also featur..
437.10 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7560U CR
Industrial USB to RS-232 Converter. The I-7560/I-7560U provides a Windows serial COM port via it's USB connection and is compatible with new and legacy RS-232 devices. USB Plug-and-Play allows easy serial port expansion and requires no IRQ, DMA, or I/O port settings manually.It also features a full set of RS-232 modem data and control signals (TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI and GND) on it's PC compatible DB-9 male connector. It also featur..
474.70 zł
2 year warranty
Quantity discount
3-4 days
Brand: ADF Web
Model: HD67020-B2-3
MBus to RS-232 converter (Master MBus: up to 3 slaves), housing type B (wide), DIN rail mount. This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232. HD67020 is a Plug&Play device and it allows to connect up to 3 M-Bus Slaves to RS232. The converter does not require any configuration. The baudrate is automatically detected at RS232 side and used (the same) to the M-Bus side.Characte..
512.30 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: tM-7520U CR
Industrial Isolated RS-232 to RS-485 Converter. The tM-7510U repeater simply amplifies, or boosts, existing RS-485 signals to enable them to cover longer distances. It extends the communication distance by 4000 ft. (1200 m) or increases the maximum number of bus nodes. The module provides 2500 VDC of isolation allowing you to separate and protect critical segments of the system from the rest of the RS- 485 network.The tM-7510U provides 2 modes of..
526.40 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7520 CR
Industrial Isolated RS-232 to RS-485 Converter.
The I-7520 is an advanced isolated RS-232 to RS-485 converter that enables reliable and stable communication between devices in industrial automation, SCADA systems, and smart buildings. This device eliminates the limitations of the RS-232 standard, allowing communication over distances up to 1200 m and enabling multiple device connections on an RS-485 network.
With 3000 VDC galvan..
535.80 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7520R CR
Industrial RS-232 to Isolated RS-485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change an..
554.60 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7520U CR
Isolated RS-232 to 4 Channels RS-485 Converter. RS-485 Active HubThe I-7520U is isolated RS-232 to 4-ch RS-485 active star wiring hub, it has 4 independent RS-485 output channels and one RS-232 input channel. Each output channel is equipped with an individual driver. The data from a master to the input channel will simultaneously be forwarded to all the four output channels.Baud Rate SettingThe I-7520U provides 2 modes of baud rate setting, one i..
578.10 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7520A CR
Industrial Isolated RS-232 to RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to chang..
606.30 zł
2 year warranty
Quantity discount
3-4 days
Brand: ADF Web
Model: HD67020-B2-10
MBus to RS-232 converter (Master MBus: up to 10 slaves), housing type B (wide), DIN rail mount. This series allow to read/write M-Bus Slaves devices by RS232, ensuring galvanic isolation between M-Bus and RS232. HD67020 is a Plug&Play device and it allows to connect up to 10 M-Bus Slaves to RS232. The converter does not require any configuration. The baudrate is automatically detected at RS232 side and used (the same) to the M-Bus side.Charac..
615.70 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7520AR CR
RS-232 to isolated RS-422/485 Converter. Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-422 and RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-422 or RS-485 signal with no need to change any hardw..
639.20 zł
Quantity discount
Warranty 12 months
2-3 weeks
Brand: ICPDAS
Model: I-7561 CR
Industrial USB to RS-232/422/485 Converter
The I-7561 is an advanced isolated USB to RS-232/422/485 converter that enables reliable and stable communication between PCs and industrial devices. With 3000 VDC galvanic isolation, the device effectively protects systems from interference, surges, and potential differences, ensuring secure data transmission even in demanding industrial environments.
The I-7561 converter supports USB 1.1/..
667.40 zł