To be confirmed
Copper bare wires for overhead power lines.
Characteristics:
- Material: Hard wires according to ZN-PBP-213:1997 from copper Cu-ETP according to PN-EN 1977
- Explanation of markings:
- Cable D 4 mm² - ZN-PBP-213: 1997 - Copper single-wire conductor (D) with rated cross-section (4 mm²)
- Cable L 25 mm² - Multi-strand bare copper wire (L) with rated cross-section (25 mm²)
- Structure of a multi-conductor wire: Wires twisted with concentric layers, directions of twisting of adjacent opposing layers, direction of the outer layer should be right
- Application: For the construction of overhead power lines
- Packing: On drums
Warning! After agreement with the manufacturer, it is possible to make cables according to other subject standards
Complies with: ZN-PBP-213:1997, PN-74/E-90081
Cable parameters | |
Core | Copper |
Maximum allowable tensile stresses | 1.45 kN, 2.18 kN, 3.53 kN, 5.54 kN, 8.6 kN, 12.03 kN, 17.05 kN, 24.22 kN, 32.67 kN, 40.32 kN, 51.15 kN, 6.36 kN, 83.07 kN, 97.77 kN |
Standard packaging | On drums |
Outer diameter [mm] | 2.26, 2.77, 3.57, 5.13, 6.39, 7.56, 9.0, 10.85, 12.6, 14.0, 15.82, 17.64, 20.16, 22.5 |
Cable weight [kg/km] | 35.6, 53.6, 89, 146, 226, 316, 449, 637, 859, 1060, 1345, 1673, 2185, 2715 |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!