Medium Voltage Cables in XLPE insulation for wind power with aluminum conductor, multi-strand class 2, burnished, RMC type. Compliant with IEC 60502-2:2005 and BS 6622:2007...
Bare wires made of AlMgSi alloy for overhead power lines. Characteristics:Material: AlMgSi alloy wires type AL3 according to PN-EN 50183Structure of the wire: Wires twisted in coaxial layers, directions of twisting opposite layers, direction of the outer layer should be rightApplication: For the construction of overhead power linesPacking: On drumsComplies with: PN-EN 50182..
Self-supporting cable (s) with a conductor of aluminum alloy (AA) in the insulating coating of crosslinked polyethylene resistant to sunlight (XS), and the spread of the flame (n). Construction:Conductor: Condensed core of AlMgSi alloy, aluminum grade AL3 according to EN 50182; sealed with a special powder to prevent longitudinal moisture migrationInsulation: XLPE polyethylene insulation according to EN 50397-1: 2006Insulation color: BlackPropert..
Bare steel and aluminum wires for overhead power lines. Characteristics:Material:Hard aluminum wires according to PN-EN 60889Steel wires type ST1A according to PN-EN 50189Structure of the wire: Single or multi-wire core made of galvanized steel wires, lubricated, subsequent layers made of aluminum wires twisted concentrically, the twisting directions of adjacent layers must be opposite and the direction of the outer layer should be rightApplicati..
Aluminum bare wires for overhead power lines. Characteristics:Material: Hard aluminum wires according to PN-EN 60889Structure of the wire: Wires twisted with concentric layers, directions of twisting of adjacent opposing layers, direction of the outer layer should be rightApplication: For the construction of overhead power linesPacking: On drumsComplies with: PN-EN 50182..
Self-supporting power cables with aluminum cores and cross-linked polyethylene insulation, resistant to flame propagation. One and multi-core, rated voltage: 0.6 / 1 kV.Construction:Veins: Aluminum, round, compactedCore insulation: Cross-linked polyethylene, resistant to flame propagationMarking: Digital printing or longitudinal notches, the number of which corresponds to the number of the vein. In 6-core cables, the wires with reduced cross-sect..
Cross-linked halogen-free multi-core cable in insulation and sheath. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive ..
Cross-linked halogen-free multi-core cable in insulation and sheath. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive ..