Cross-linked halogen-free single-core cable. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive gases during combustion ..
Cross-linked halogen-free single-core cable. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive gases during combustion ..
Cross-linked halogen-free single-core cable in insulation and sheath. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive..
Copper bare wires for overhead power lines. Characteristics:Material: Hard wires according to ZN-PBP-213:1997 from copper Cu-ETP according to PN-EN 1977Explanation of markings:Cable D 4 mm² - ZN-PBP-213: 1997 - Copper single-wire conductor (D) with rated cross-section (4 mm²)Cable L 25 mm² - Multi-strand bare copper wire (L) with rated cross-section (25 mm²)Structure of a multi-conductor wire: Wires twisted with concentric layers, directions of t..
EPR / CPE power cable.Construction:Rated voltage: RHH / RHW-2 600 and 2000 V, RW-90 CSA 1kV, DLO 2 kVWire: Copper wire, not tinned according to ASTM B-3-01Separator: A separator with a suitable material around the veinInsulation: EPR rubber compound according to UL, CSA, ICEA, AAR RP-588, 90 °CCore identification: Main ray colors according to HD 308, DIN VDE 0293-308Coating: Black from a CPE type rubber compound with improved properties according..
Shielded teleinformation cables. Category 6 teleinformation cables with steam bundles individually shielded with estrofolic foil with sputtered aluminum, with insulation made of solid polyethylene or polyethylene with a uniform polyethylene layer, shielded, with a coating made of PVC. The cable center is protected with an estrofolic film screen sprayed with aluminum or covered with a mesh screen tinned copper wires. A tinned grounding conductor, ..
Shielded teleinformation cables. Teleinformation cables of categories 5, 5e and 6 with steam bundles, with insulation of wires made of solid or foamed polyethylene with a single layer of polyethylene, screened, with a coating made of PVC. The cable center is protected with an estropholic foil and an estrofolic film screen of aluminum sprayed between which a tinned earthing conductor is laid. The cat. 6 cable has an additional vapor separator in t..
OUTDOOR F/UTP, CAT 5 cable. Construction:Cable wires: Soft copper wiresCore insulation: Polyethylene or polyethylene foamThe color of insulation of wires in bundles:Core "a": whiteCore "b": blue, orange, green, brownExecution options of core "a":variant 1: white with a ring color of core "b"version 2: white with a longitudinal stripe color of core "b"version 3: white plus 20% of core "b" colorGrounding conductor: Copper, tinnedShield on the cente..
Patch cable F/UTP, Kat 5, 5e. Construction:Cable wires: Copper twisted pair 7x0.2 mm AWG24/7, 7x0.16 mm AWG26/7Core insulation: Solid polyethylene or foam polyethylene with a single layer of polyethyleneThe color of insulation of wires in bundles:Core "a": whiteCore "b": blue, orange, green, brownExecution options of core "a":variant 1: white with a ring color of core "b"version 2: white with a longitudinal stripe color of core "b"version 3: whit..
OUTDOOR F/UTPf, CAT 5 filled. Construction:Cable wires: Copper twisted pairCore insulation: Solid polyethylene or foam polyethylene with a single layer of polyethyleneThe color of insulation of wires in bundles:Core "a": whiteCore "b": blue, orange, green, brownExecution options of core "a":variant 1: white with a ring color of core "b"version 2: white with a longitudinal stripe color of core "b"version 3: white plus 20% of core "b" colorGroundin..