Znajdź produkty TELE-FONIKA Kable w najniższych cenach.

Self-supporting cable (s) with a conductor of aluminum alloy (AA) in the insulating coating of crosslinked polyethylene resistant to sunlight (XS), and the spread of the flame (n). Construction:Conductor: Condensed core of AlMgSi alloy, aluminum grade AL3 according to EN 50182; sealed with a special powder to prevent longitudinal moisture migrationInsulation: XLPE polyethylene insulation according to EN 50397-1: 2006Insulation color: BlackPropert..

Optotelecommunications tube cables, self-supporting, reinforced for hanging. ADSS-XXOTKtsd...kN - self-supporting external cable (ADSS-), with external polyethylene (X) coating, internal polyethylene (X) coating, optotelecommunications (OTK), tubular (loose tube), with dry center seal (ts), completely dielectric (d), with aramid fiber reinforcement between cable sheaths (D), working tension (...kN).Construction:Central element: Dielectric FRP rod..

Bare steel and aluminum wires for overhead power lines. Characteristics:Material:Hard aluminum wires according to PN-EN 60889Steel wires type ST1A according to PN-EN 50189Structure of the wire: Single or multi-wire core made of galvanized steel wires, lubricated, subsequent layers made of aluminum wires twisted concentrically, the twisting directions of adjacent layers must be opposite and the direction of the outer layer should be rightApplicati..

Aluminum bare wires for overhead power lines. Characteristics:Material: Hard aluminum wires according to PN-EN 60889Structure of the wire: Wires twisted with concentric layers, directions of twisting of adjacent opposing layers, direction of the outer layer should be rightApplication: For the construction of overhead power linesPacking: On drumsComplies with: PN-EN 50182..

Self-supporting power cables with aluminum cores and cross-linked polyethylene insulation, resistant to flame propagation. One and multi-core, rated voltage: 0.6 / 1 kV.Construction:Veins: Aluminum, round, compactedCore insulation: Cross-linked polyethylene, resistant to flame propagationMarking: Digital printing or longitudinal notches, the number of which corresponds to the number of the vein. In 6-core cables, the wires with reduced cross-sect..

Multi-wire bare copper cores in soft state to the traction network...

Multi-core bare copper wires to the traction network...

Copper multi-core suspension bare wire rope to the traction network...

Cross-linked halogen-free multi-core cable in insulation and sheath. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive ..

Cross-linked halogen-free multi-core cable in insulation and sheath. Intended for use as power cables for transmission of electricity in rolling stock in rail vehicles (locomotives, trains, trolleybuses, etc.) with a high concentration of people and property. Installations in cable ducts, tubes and pipes. Special application for installations where there are increased requirements for fire protection and where low emission of fumes and corrosive ..