Power cables with aluminum wires, XLPE insulation and PVC coating.PVC insulated and sheathed cables for the transmission of electricity. Designed for installation in the air, in the ground, under water, inside buildings and in cable ducts.Construction:Cores: Aluminum, round class 1 (RE) or round, ro..
Power cables with aluminum wires, PVC insulation and PE coating.PVC insulated and sheathed cables for the transmission of electricity. Designed for installation in the air, in the ground, under water, inside buildings and in cable ducts.Construction:Cores: Aluminum, round class 1 (RE) or round, roun..
Halogen free electrical ship cables of medium voltage with low smoke emission, one and three-core. Compliant with IEC 60092-354. Construction:Conductors: Bare copper conductor, round, stranded and compacted Class 2 acc. to BS EN 60228Insulation:extruded semi-conducting conductor screeninsulation XLP..
Installation cables with XLPE insulation and halogen-free plastic coating. Installation cables with crosslinked polyethylene insulation and a sheath of halogen-free thermoplastic material, with low fumes and corrosive gases emission during combustion. Designed for installation in buildings with stri..
Special single-core cables in rubber insulation. The cables are intended for permanent installation in rail vehicles, in pipes and closed ducts. 1.8 / 3 kV cables can be used in control devices and distributors up to 1000V. In power and connection systems, this type of cable gives high resistance to..
Wires with insulation and rubber coating for lifting equipment, transport equipment and conveyors.Cables are used where there is frequent winding and unwinding during operation, especially with simultaneous tensile load and / or twisting load and / or forced cable routing. Perfect for use in constru..
Hollow halogen-free single-core cables. Construction:Wires: Of tinned copper wires, multi-wire flexible class 5 according to IEC 60228, HD 383Separator: The right tape between the conductor and the insulationInsulation: EPR rubber compound type 3GI3 according to DIN VDE 0207 part 20Outer shell: Halo..
Heavy cable with insulation and rubber coating for mining and industry.Cables intended for very heavy mechanical loads, in fixed and mobile installations as a power cord for high power devices, for example in opencast mines, excavations, construction sites and in the engineering industry, in dry and..
Local, reinforced telecommunication cables with halogen-free coatings. NTKMXFtlN, NTKMXpFtln - telecommunication (T) cable (K) local (M), bent, with polyethylene insulation (X) or with insulation made of polyethylene foam with a layer of polyethylene homogeneous (Xp), with a moisture barrier, with a..
Station telecommunications cables, shielded, halogen-free. NTKSXekw - telecommunication (T) cable (K) station (S), with polyethylene insulation (X), common screen on the center (eq), with a coating of flame retardant material with limited smoke emission and toxic gases (N).Options:NzTKSX - telecommu..
Power cables for permanent installation with single or multi-wire copper conductors, with PVC insulation and sheath. Installation cable with PVC insulation and sheath, without a green-yellow conductor (O) or with a green-yellow conductor (J).The equivalents of NYM 300/500 V cables are:YDY 300/500 V ..
Power cables for mobile and portable receivers. Mining wires shielded for rated voltage 0.6 / 1 kV.Construction:Working, protective and auxiliary veins: Copper tinned multi-wire class 5 acc. PN-EN 60228Separator: On operating wires made of polyester filmInsulation: IEP heat-resistant rubber accordin..
Power cables for mobile and portable receivers. Mining wires shielded for rated voltage 0.6 / 1 kV.Construction:Working resins: Copper multi-wire class 5 acc. PN-EN 60228Auxiliary veins: Copper tinned multi-wire class 5 acc. PN-EN 60228Protective conductor: Made in the form of a braid made of tinned..
Power cables for mobile and portable receivers. Mining shielded cables with six working conductors for rated voltage of 1.9 / 3.3 kV.Construction:Working, protective and auxiliary veins: Copper tinned multi-wire class 5 acc. PN-EN 60228Separator: Coils made of polyester film on working veinsInsulati..
A power cable with insulation and a rubber tire for mobile and mobile receivers shielded to 3.6 / 6 kV. Construction:Working and protective conductors: Copper, copper tinned multi-wire class 5 according to PN-88 / E-60228Insulation: Made of heat-resistant rubber IEP according to PN-E 29100The color ..
Power cables 3 and 4-core wires with insulation and rubber tire for rated voltage 0.6 / 1kV for deep-water engines.It is recommended:to use wire in a well at a depth of immersion up to 20mto not install cables at a temperature lower than -10 ° Cthat the radius of bending expressed in multiples of th..
3 and 4-string power cables with insulation and rubber tire for rated voltage 0.6 / 1 kV for submersible engines.Construction:Working and protective conductors: Copper multi-wire according to PN-EN 60228 class 5 (tinned or uncoated wires)Separator: Polyester film or telephone paperInsulation: Made o..
Single-core power cables with insulation and rubber tire for mining mobile and portable receivers for nominal voltage 0.6 / 1kV.Construction:Wire: Copper multi-wire class 5c (tinned) according to PN-88 / E-90160Separator: On operating wires made of polyester filmInsulation: Made of rubber IZ accordi..
Power cables with insulation and rubber tire for mining mobile and portable receivers, multicore unshielded for rated voltage 0.6 / 1kV.Construction:Wire: Copper multi-wire class 5c (tinned) according to PN-88 / E-90160Separator: On operating wires made of polyester filmInsulation: Made of rubber IZ..
Power cables with insulation and rubber tire for mining mobile and portable receivers, multicore unshielded for rated voltage 0.6 / 1kV.Construction:Wire: Copper multi-wire class 5c (tinned) according to PN-88 / E-90160Insulation: Made of rubber IZ according to PN-89 / E-29100Color of insulation:2-w..