Single-core cables in PVC insulation, without coating, heat-resistant general purpose for permanent installation. Construction:Core: Copper, manufactured according to EN 60228:Class 1 H05V2-UClass 2 H05V2-RClass 5 H05V2-KInsulation: PVC type TI3 according to EN 50363-3Insulation color: green-yellow, blue, black, brown, gray, orange, pink, red, turquoise, violet, whiteCharacteristics:Maximum temperature of the core during cable operation: +90°CThe..
Multi-core heat resistant cables, for mobile and portable receivers. Cables are best in home rooms, kitchens, offices, also in damp and wet rooms, with medium mechanical loads. At elevated ambient temperature for household appliances. Cables are suitable for heating and cooking appliances and for use in places with high temperature (eg lighting fittings) where there is no danger of contact with hot parts. It is not suitable for use in the open ai..
Multi-conductor cables with PVC insulation and sheath, for mobile and portable receivers.In home rooms, kitchens, offices; for household appliances, also in humid and wet rooms, with medium mechanical loads (eg washing machines, centrifuges and refrigerators). It can be used for kitchen and heating appliances, provided that if there is no danger of contact with hot elements and is not exposed to other heat influences. It is not suitable for outdo..
Single-core cables, uncoated, for permanent installation, low smoke emission and corrosive gases during smoking. ApplicationSingle-core cables, without a coating, particularly suitable where low smoke and corrosive gases emission are required in case of fire. H05Z-U, H05Z-K - Single-core cables, without a single layer, are suitable for installation in a wiring or plaster pipe, however only for signal and control circuits.Construction:Live: Copper..
Multi-conductor, heat-resistant cables with insulation and rubber coating, for mobile and portable receivers.Cables intended for industrial and agricultural workshop equipment, boilers, electric heaters, portable lamps, electric tools such as drills, circular saws, household electrical tools, as well as portable motors or machines on construction sites or farms, etc., also for laying on permanent in temporary buildings and barracks for power supp..
Multi-strand flexible cables with EPR insulation with polyurethane coating, for mobile and portable receivers, for use in conditions of high mechanical and chemical exposures. Wires that have a polyurethane coating are very resistant to mechanical factors, such as abrasion resistance and oils, solvents, sewage, oxygen, ozone, weather conditions. Designed for use wherever there is a high risk of mechanical damage (drawing, dragging, moving, bendin..
Wires in rubber insulation, flexible 1, 2, 3, 4, 5 and multi-core.For supplying industrial and agricultural mobile and portable receivers operating in temperate climates.Construction:Wires: Multi-wire copper according to PN-EN 60228 class 5, tinned or bare wiresInsulation: Ethylene-propylene rubber (EPR) type EI4 according to EN 50363-1Core identification (Main core colors according to HD 308, DIN VDE 0293-308):G (with green-yellow vein):3 veins:..
Flexible cables, in rubber insulation and sheath. Cable for use in wind turbines. The cable may be designed for 0.6 / 1kV voltage in case the installation is well protected. Flexible cables for medium mechanical load in dry and wet environment, suitable for large heating installations or heating plates. Inspection lamps, electrical tools such as drills, circular saws. Domestic electric tools, portable motors, etc.Construction:Veins: Annealed, fle..
Waterproof hoses in the synthetic elastomer coating, for pumps.Works best for wet and humid outdoor conditions, with medium mechanical exposures, eg for workshop, industrial and agricultural equipment. Cables particularly recommended for use in fresh water at a temperature of up to 40 ° C and at a depth of up to 10 m, such as a combination of submersible pumps or for similar applications. They are not suitable for underwater electricity transmiss..
Single-core cables in PVC insulation, without coating, general purpose for permanent installation. ApplicationFor laying in installation pipes mounted on or embedded in the surface. For permanently protected installations inside or outside lighting or control devices for alternating voltage up to 1000V or DC voltage up to 750V relative to ground.Construction:Live: Copper, annealed according to EN 60228:Class 1 H07V-UClass 2 H07V-RClass 5 H07V-KIn..
Single-core cables in PVC insulation, without coating, heat-resistant general purpose for permanent installation. ApplicationFor laying in installation pipes mounted on or embedded in the surface. For permanently protected installations inside or outside lighting or control devices for alternating voltage up to 1000V or DC voltage up to 750V relative to ground.Construction:Live: Copper, annealed according to EN 60228:Class 1 H07V2-UClass 2 H07V2-..
Flexible cables with insulation and coating of cross-linked, halogen-free mixes, with low fumes and corrosive gases emission.Usage:For indoor use, temporarily outside, mainly in situations where low emission of fumes and corrosive gases is required in case of fireOther industrial applicationsConstruction:Veins: Flexible copper class 5 according to PN-EN 60228, tinned or bare wiresSeparator: If necessary, a suitable tape between the conductor and ..