Hollow halogen-free single-core cables. Construction:Wires: Of tinned copper wires, multi-wire flexible class 5 according to IEC 60228, HD 383Separator: The right tape between the conductor and the insulationInsulation: EPR rubber compound type 3GI3 according to DIN VDE 0207 part 20Outer shell: Halogen free thermoset compound HM3 according to DIN VDE 0207 p. 24The color of the external coating: Black or after agreeing in a different colorCharacte..
Heavy cable with insulation and rubber coating for mining and industry.Cables intended for very heavy mechanical loads, in fixed and mobile installations as a power cord for high power devices, for example in opencast mines, excavations, construction sites and in the engineering industry, in dry and humid rooms and in the open air. It is very mechanically resistant. High resistance to tearing, cutting, abrasion, oils, lubricants, chemicals and th..
Power cables for permanent installation with single or multi-wire copper conductors, with PVC insulation and sheath. Installation cable with PVC insulation and sheath, without a green-yellow conductor (O) or with a green-yellow conductor (J).The equivalents of NYM 300/500 V cables are:YDY 300/500 V cables according to PN-HD 21.4 in the cross sections from 1.5mm² to 10mm²YLY 300/500 V cables according to PN-HD 21.4 in the cross section range from ..
Power cables for mobile and portable receivers. Mining wires shielded for rated voltage 0.6 / 1 kV.Construction:Working, protective and auxiliary veins: Copper tinned multi-wire class 5 acc. PN-EN 60228Separator: On operating wires made of polyester filmInsulation: IEP heat-resistant rubber according to PN-89 / E-29100Screen on the working veins and on the sheath of the auxiliary veins: In the form of a roll with a conductive band and a braid of ..
Power cables for mobile and portable receivers. Mining wires shielded for rated voltage 0.6 / 1 kV.Construction:Working resins: Copper multi-wire class 5 acc. PN-EN 60228Auxiliary veins: Copper tinned multi-wire class 5 acc. PN-EN 60228Protective conductor: Made in the form of a braid made of tinned copper wires with a diameter of 0.30 mm and a plastic yarn placed on the shell of auxiliary veins, in a roll made of polyester film. The cross-sectio..
Power cables for mobile and portable receivers. Mining shielded cables with six working conductors for rated voltage of 1.9 / 3.3 kV.Construction:Working, protective and auxiliary veins: Copper tinned multi-wire class 5 acc. PN-EN 60228Separator: Coils made of polyester film on working veinsInsulation: IEP heat-resistant rubber according to PN-89 / E-29100Color of insulation:Working: 2 blue, 2 natural, 2 redAuxiliary: 2 blue, 2 natural, 2 redScre..
A power cable with insulation and a rubber tire for mobile and mobile receivers shielded to 3.6 / 6 kV. Construction:Working and protective conductors: Copper, copper tinned multi-wire class 5 according to PN-88 / E-60228Insulation: Made of heat-resistant rubber IEP according to PN-E 29100The color of the insulation of the conductors: NaturalScreen: In the form of a conductive rubber layer of type P according to PN-89 / E-29100Core: P-type conduc..
Power cables 3 and 4-core wires with insulation and rubber tire for rated voltage 0.6 / 1kV for deep-water engines.It is recommended:to use wire in a well at a depth of immersion up to 20mto not install cables at a temperature lower than -10 ° Cthat the radius of bending expressed in multiples of the outside diameter of duct D is not less than 5DIt is allowed:to use in conductors with veins made of wires with a nominal diameter of 0.31 mm and la..
3 and 4-string power cables with insulation and rubber tire for rated voltage 0.6 / 1 kV for submersible engines.Construction:Working and protective conductors: Copper multi-wire according to PN-EN 60228 class 5 (tinned or uncoated wires)Separator: Polyester film or telephone paperInsulation: Made of general purpose insulation rubber according to PN-89 / E-29100Insulation color:3-wire: blue, black, brown4-wire: green-yellow, blue, black, brownTir..
Single-core power cables with insulation and rubber tire for mining mobile and portable receivers for nominal voltage 0.6 / 1kV.Construction:Wire: Copper multi-wire class 5c (tinned) according to PN-88 / E-90160Separator: On operating wires made of polyester filmInsulation: Made of rubber IZ according to PN-89 / E-29100The color of the insulation of the veins: NaturalSpacer: Made of rubber IZ according to PN-89 / E-29100Tire: Made of ON4 or ON3 t..
Power cables with insulation and rubber tire for mining mobile and portable receivers, multicore unshielded for rated voltage 0.6 / 1kV.Construction:Wire: Copper multi-wire class 5c (tinned) according to PN-88 / E-90160Separator: On operating wires made of polyester filmInsulation: Made of rubber IZ according to PN-89 / E-29100Color of insulation:4-wire:protective vein - black corrugatedworking veins - green, red, natural5-wire:protective conduct..
Power cables with insulation and rubber tire for mining mobile and portable receivers, multicore unshielded for rated voltage 0.6 / 1kV.Construction:Wire: Copper multi-wire class 5c (tinned) according to PN-88 / E-90160Insulation: Made of rubber IZ according to PN-89 / E-29100Color of insulation:2-wire: working veins - red, natural4-wire:protective vein - black corrugatedworking veins - green, red, natural5-wire:protective conductor - black corru..