FL485
Shipping 24h
Test for Free!
Industrial RS-485 separator with 4500V isolation and Alnico housing.
Optoisolator (4500V), RS-485 interface separator (repeater) with Alnico housing compatible with IEC61000-4-5 and ITU-TK20&K21 standards for top quality surge protectors. FL485 have high respond speed, low output rudimental voltage, ascendance transfer performance. All have #10 ground screws which must be connected to a solid ground.
Features:
- Three stages of protection on every data line
- Protected signal ground connection
- Easy to install, plug-and-play
- 4500V surge protectionl voltage
Specification:
- Standard: Accord EIA RS-485 standard
- RS485 signal: IEC6100-4-5 and ITU-TK20&21
- Working voltage: 0-5V
- Limit voltage: <15V
- Apply Band rate: 1Mbps
- Isolate signal: TXD, RXD, GND
- Connector: Standard industrial terminal block
- Insert consumption: <0.5dB
- Delay time: <1ns
Environment
- Working temperature: -20°C to 85°C
- Storage temperature: -40°C to 85°C
- Humidity: Relative humidity 5% to 95%
Power
- Input powered: No power supply needed
- Consumption: No consumption
Dimension
- Dimensions (LxWxH): 80 mm x 25 mm x 22 mm
- Shell: Alnico
- Color: Blue
- Weight: 10g
Warranty: 3 years
Approvals: FCC,CE, RoHS approvals
Dimensions:
-1-250x250h.webp "GW1114-4DI(RS-485)")
-2-250x250w.webp "GW1114-4DI(RS-485)")
-P1-250x250h.webp "GW1101-1D(RS-485)")
-3-250x250w.webp "GW1101-1D(RS-485)")
-DB-P(12-48VDC)-P-1-250x250h.webp "GW1101-1DI(3IN1)-DB-P(12-48VDC)")
-DB-P(12-48VDC)-1-1-250x250h.webp "GW1101-1DI(3IN1)-DB-P(12-48VDC)")
-250x250.webp "GW1101-1DI(RS485)")
-TB-1-250x250h.webp "GW1102-2D(RS-485)")
-TB-3-250x250h.webp "GW1102-2D(RS-485)")
-DB-P(12-48VDC)-250x250.webp "GW1102-2DI(3IN1)-DB-P(12-48VDC)")
-250x250.webp "GW1102-2DI(RS485)")
