3-4 days
Isolated RS-485 signal repeater, housing type A (slim), DIN rail mount.
This product is suitable for solving various problems of a RS485 line, extensions of the line, increasing the nodes number, galvanic isolation, to get a strong protection from the sparks noise and electrostatic charges or simply to change the baud rate of the communication. Suitable for Modbus, BACnet MS/TP protocols and every other protocol that used RS485 like transmission medium.
Configuration:
Thanks to the SW67149 software on your PC you can:
- Define the parameters of the RS485 (Port 0 and Port 1)
- Update the Firmware
Characteristics:
- Galvanic isolation between the two Buses
- 35mm DIN rail mount
- Baud Rate, Parity, StopBit changeable with software
Specifications:
- Ports: 2x RS-485; 1x RS-232
- RS-485 Connector: Terminal Block
- Data Rates Serial: Up to 115200 bps
- Power supply: 8...19VAC; 8...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67149
- ORDER CODE: HD67149-A1
Configurator - Software SW67149 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Serial port | 2x RS-485, 1x RS-232 |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~19VAC, 8~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!