3-4 days
Industrial PROFINET slave to SNMP agent converter, housing type A (slim), DIN rail mount.
HD67613 allows you to connect a PROFINET network (for example a SIEMENS PLC, etc) with a SNMP Manager net (for example a PC, Supervisory System, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67613 software.
Configuration:
Thanks to the SW67613 software on your PC you can:
- Define the parameters of PROFINET line
- Define the parameters of SNMP line
- Define the SNMP OID in Read and in Write
- Define the SNMP Trap messages
- Update the device
Characteristics:
- Mountable on 35 mm DIN rail
- Up to 1024 bytes in reading and 1024 bytes in writing
- Bi-directional information exchange between SNMP bus and PROFINET bus
- Isolation between Power Supply - Ethernet
Specifications:
- Ports: 2x Ethernet
- PROFINET protocol: PROFINET slave
- SNMP protocol: SNMP Agent
- PROFINET connector: RJ45
- SNMP connector: RJ45
- Data Rates PROFINET: 10/100 Base-T Autosensing
- Data Rates SNMP: 10/100 MHz Autosensing
- Power supply: 8...24VAC; 12...35VDC
- Operating temperature: -40°C/+85°C (-40°F/+185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67613
- ORDER CODE: HD67613-A1
Configurator – Software SW67613 FREE DOWNLOAD
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | PROFINET, SNMP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!