3-4 days
Industrial EtherNet/IP Slave to Modbus TCP Master Converter, housing type A (slim), DIN rail mount.
HD67664-A1 allows you to connect an EtherNetIP net (for example an Allen-Bradley PLC...) with some Modbus TCP Slaves devices. Converter is easy to configure thanks to free SW67664 software.
Configuration:
Thanks to the SW67664 software on your PC you can:
- Define the parameters of Modbus TCP line
- Define the parameters of EthernetIP line
- Define the data to Read in Modbus TCP and where to map these information in the EthernetIP array
- Define the data to Write in Modbus TCP and where to take the information in the EthernetIP array
- Update the device
Characteristics:
- Up to 500 bytes in reading and 500 bytes in writing
- Isolation between Modbus TCP - EthernetIP - Power Supply
- Bi-directional information exchange between EthernetIP and Modbus TCP
- Mountable on 35mm Rail DIN
Specifications:
- Ports: 2x Ethernet
- EtherNet/IP Protocol: EtherNet/IP Slave
- Modbus TCP Protocol: Modbus TCP Master
- Data Rates Modbus TCP: 10/100 Base-T Autosensing
- Data Rates EtherNet/IP: 10/100 Base-T Autosensing
- EtherNet/IP connector: RJ45
- Modbus TCP connector: RJ45
- Power supply: 8...19VAC; 8...35VDC
- Operating temperature: -40° to +85° (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67664
- ORDER CODE: HD67664-A1
Configurator – Software SW67664 FREE DOWNLOAD
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
Protocol support | Modbus TCP, Ethernet IP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!