HD67675-IP-A1 BACnet IP slave to PROFIBUS DP master converter with isolation

Industrial BACnet IP slave to PROFIBUS Master converter, PROFIBUS DP DPV0 support, housing type A (slim), DIN rail mount. 

HD67675-IP-A1 is an industrial protocol converter designed to integrate BACnet/IP networks (in slave mode) with PROFIBUS DPV0 master networks. It allows seamless two-way communication between supervisory systems like SCADA or BMS and PROFIBUS-connected devices such as PLCs or sensors. The device enables full interoperability between building automation systems and industrial control infrastructures. The converter supports bi-directional data exchange and offers compatibility with a wide range of BACnet objects and properties. This makes it a flexible solution for complex integrations in commercial buildings, manufacturing plants, and energy control systems. It ensures that real-time data from BACnet environments can be effectively used and controlled within PROFIBUS-based applications.

This gateway supports multiple BACnet object types, including Analog Input/Output/Value, Binary Input/Output/Value, MultiState Input/Output/Value, and special types like Life-Safety Point, Life-Safety Zone, Access Door, and Accumulator. It also handles the Present-Value property for efficient monitoring and control. With this extensive support, HD67675-IP-A1 can interact with a broad range of BACnet-compatible devices. Built with triple galvanic isolation between BACnet, PROFIBUS, and the power supply, the converter ensures safe and reliable operation even in electrically noisy or industrial environments. Its slim type A housing is compact enough for dense control cabinets, and it mounts easily on a standard 35mm DIN rail.

The free configuration software SW67675 simplifies the setup process. Users can define BACnet and PROFIBUS parameters, assign objects and properties, and perform firmware updates. It provides an intuitive interface for engineers and system integrators, streamlining commissioning even in large-scale deployments. The converter features 2x Ethernet ports for BACnet IP, and a female D-sub DE-9 connector for PROFIBUS. It operates in a wide temperature range of -40°C to +85°C, and supports input voltages from 8~24V AC or 12~35V DC. Its rugged construction and extended electrical specifications make it suitable for demanding industrial applications.

Configuration:

Thanks to the SW67675 software on your PC you can:

• Define the parameters of BACnet line
• Define the parameters of PROFIBUS line
• Define the PROFIBUS network
• Define the BACnet data that a master reads/writes
• Update the device firmware

Characteristics:

• Triple isolation between BACnet - Power Supply, BACnet - PROFIBUS, Power Supply - PROFIBUS
• Bi-directional data exchange between BACnet and PROFIBUS networks
• Supports PROFIBUS DP-V0 slave devices
• Supported BACnet object types: AI, AO, AV, BI, BO, BV, PI, IV, LAV, MSI, MSO, MSV, LSP, LSZ, AD, ACC
• Supported property: Present-Value
• Mounting: 35mm DIN rail

Specifications:

• Ports: 1x PROFIBUS; 2x Ethernet
• PROFIBUS protocol: DPV0 - Master
• BACnet protocol: BACnet IP - Slave
• PROFIBUS data rate: Up to 6 Mbps
• BACnet data rate: 10/100 Base-T
• PROFIBUS connector: D-sub DE-9 female
• BACnet connector: RJ45
• Power supply: 8~24V AC; 12~35V DC
• Power connector: 5mm screw terminal
• Operating temperature: -40°C to +85°C
• Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
• Weight: approx. 200g
• Mounting: 35mm DIN rail
• PROFIBUS support: DP DPV0
• Software: SW67675
• Order Code: HD67675-IP-A1

Configurator – Software SW67675: FREE DOWNLOAD

---