RPM-416

2-3 days
RPM-416
- Stock: 2-3 days
- Brand: NOVATEK-ELECTRO
- Model: RPM-416
0,00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
Brand: ADF Web
Model: HD67054M-20
MBus Concentrator - Datalogger with RS-232 interface (Master MBus: up to 20 slaves). The HD67054M-xxx is a MBus Concentrator. It allow to read data fr..
1 287,80 zł
Brand: NOVATEK-ELECTRO
Model: TR-100
TR-100 is designed for take measurement and control of temperature of device by 4 sensors which are may connected by two or three wire connection sche..
0,00 zł
Brand: NOVATEK-ELECTRO
Model: TR-101
TR-101 is designed for measuring and controlling a device temperature by means of four sensorsconnected according to a two- or four-wire diagram, with..
0,00 zł
Brand: NOVATEK-ELECTRO
Model: EM-486
Industrial remote Modbus RTU (RS-485) controller with in-built GSM modem. The EM-486 provides access to readings from connected sensors and Modbus reg..
0,00 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
Data logger RPM-416 is a microprocessor-based device intended for electrical parameters measuringand monitoring on the data logger display as well as data archiving.
The data archiving is made on the removable memory card (SD / MMC), which can be later analyzed bysoftware program RPM-416 Data Analysis (the program can be found on website www.novatek-electro.com),installed on the standard or portable PC.Data files have extension “RDF”.Data logger RPM-416 has an inbuilt real time clock with power from a lithium-type battery.RPM-416 can be connected to Ethernet network via standard 10Base-T or 100Base-T.
In this casesimultaneously with data recording to memory card, the RPM-416 configuration and data transmitting to thePC is possible.
The main possibilities of the data logger:
- Multi-channeling – one data logger is sufficient for all working data receiving from the controlleddevice;
- Uniwersalność – w rejestratorze przewidziano podłączenie dodatkowych modułów pozwalającychrozszerzyć spektrum sygnałów wejściowych (napięcie, prąd, temperatura, wejścia dyskretne i inne);
- Galvanic separation – incoming signals of high voltage and current are galvanic separated fromother inputs which ensures easiness of data logger connection;
- High fidelity – self-control system and data saving algorithm protect against data loss in case ofemergency situations (power supply failure);
- Servicing convenience – four-lined symbolic display with illuminating enables to adjust the datalogger and monitor its work (the values of recorded incoming signals are shown on the display),the key-board is used for setting and control of the data logger;
- Remote monitoring and configuration – if the data logger is installed in a hard accessible placewith Ethernet connection it can simultaneously with the data recording on the memory card makedata transmitting to PC. It enables to make a remote monitoring of the object. The more detailedanalysis can be made on the basis of the data stored on the memory card. Web-interface enablesvia PC browser to make aomputer.
Specyfikacja techniczna
- Nominal operating supply voltage ( ), V: 220 / 240
- Performance capacity voltage ( / ), V: 24 – 265
- Power-line frequency, Hz: 45 – 65
- Power consumption (from line ~220 V), VA, not more: 6.0
- Power consumption (from power source +24 V), VA, not more: 2.2
- Period of data recording to the memory card, sec.: 0,001 – 3600
- External memory storage (memory card, optional): SD / MMC
- Maximal capacity of external memory card, GB: 32
- Supported file systems of external memory card, FAT: 12, 16, 32
- Minimal size of data file, KB 32Maximal size of data file, MB: 512
- Size of one block of recorded data (15 channels), byte: 68
- Error of clock run, at temperature 25 ºС, not more, sec / day: 1
- Connection to Ethernet or PC: 10Base-T / 100Base-TModbus
- TCP: yes
- Web-interface: yes
- FTP: yes
- Weight, kg, not more: 0.5
- Overall dimensions, mm: 157 х 91 х 57
- The intent of the device: Digital indication devices
- Nominal working mode: continuous
- Protection class rating (case / terminal block): ІР40 / IP20
- Protection class from electric shock: II
| General technical parameters | |
| Data storage | 1x SD, 1x MMC |
| Ethernet | 1x 10/100BaseT(X) |
| Protocol support | Modbus TCP |
| Industrial grade | |
| IP rating | IP20, IP40 |
| Input voltage | 220~240VAC |
1



