HD67416-E4V industrial CAN to PROFIBUS DPV0 master converter with 4 kV triple isolation

Industrial CAN to PROFIBUS master converter, PROFIBUS DP DPV0 support, metal housing resistant to vibration and shock with triple 4kV isolation between CAN/PROFIBUS, CAN/power supply and PROFIBUS/power supply.

The HD67416-E4V is specifically engineered for applications where reliable data transfer between CAN networks and a PROFIBUS DPV0 master is critical under harsh conditions. Its robust metal enclosure withstands continuous vibration and shock, making it perfect for use in automotive, rail, and marine environments, as well as industrial machinery subject to mechanical stress. The device’s triple 4 kV galvanic isolation—between CAN and PROFIBUS, CAN and power, and PROFIBUS and power—eliminates ground loops and protects sensitive electronics from voltage spikes and transients. An integrated microprocessor actively monitors bus health, logging errors and autonomously adjusting timing to maintain uptime, which is vital for 24/7 operations. To further safeguard the system, built‑in surge protection on all interfaces defends against lightning strikes and large electrical surges. Diagnostic LEDs provide real‑time status of both CAN and PROFIBUS links, dramatically reducing troubleshooting time in the field. With a footprint of just 76 × 86 × 40 mm (without lugs), it fits into tight control panels without compromising performance.

Two distinct protection variants ensure the HD67416-E4V meets diverse environmental requirements. The V‑suffix version employs a conformal PCB coating that achieves IP65 protection, shielding against dust ingress and water jets, ideal for dusty workshops and outdoor platforms. The R‑suffix option adds full resin encapsulation to deliver an IP67 rating—safe for temporary immersion and high‑humidity environments such as offshore installations or wash‑down zones. Both options retain full electrical performance and the 4 kV isolation rating, ensuring no compromise in data integrity or safety. Each unit is factory‑tested under extreme temperature, vibration, and humidity cycles to verify compliance with automotive and industrial standards. Field retrofitting kits allow existing installations to be upgraded from V to R variants without rewiring or control‑system changes, minimizing downtime and maintenance costs.

Installation is simplified with four integrated fixing lugs for horizontal, vertical, or angled mounting on any flat surface, eliminating the need for custom brackets. Alternatively, standard metal hose clamps can secure the unit in confined spaces or on irregular surfaces. Users can choose between Mini‑Fit® or Superseal 1.5 connectors based on cable requirements and environmental sealing needs, ensuring compatibility with existing wiring harnesses. The wide operating temperature range of –40 °C to +105 °C satisfies stringent automotive specifications for under‑the‑hood or engine‑bay installations. Each connector interface features robust strain relief, preventing cable fatigue and ensuring long‑term mechanical stability. A compact status display on the housing shows live CAN bus load and PROFIBUS channel activity, enabling quick verification of network performance without specialized tools.

Configuration:

Thanks to the SW67416 software on your PC you can:

• Define the parameters of CAN bus
• Define the parameters of PROFIBUS line
• Define which CAN frames contains PROFIBUS information
• Define which PROFIBUS data saves on CAN frames

Characteristics:

• Triple 4kV isolation between Power Supply / PROFIBUS / CAN
• Mini‑Fit® connectors
• Metal enclosure with fixing lugs
• Possibility to use Metal hose clamps for fixing it without using lugs
• Microprocessor for data control

Specifications:

• Ports: 1x PROFIBUS; 1x CAN
• Data Rates CAN: up to 1 Mbps
• Data Rates PROFIBUS: up to 12 Mbps
• CAN Connector: 3‑way Mini‑Fit®
• PROFIBUS Connector: D‑SUB9 Female
• Power Supply Connector: 2‑way Mini‑Fit®
• Power Supply: 10…40 V DC; 8…26 V AC
• Operating temperature: –40 °C / +105 °C (–40 °F / +221 °F)
• PROFIBUS DP DPV0 support
• Dimensions without fixing lugs: 76 × 86 × 40 mm (L × W × H)
• Dimensions with fixing lugs A: 105 × 86 × 40 mm
• Dimensions with fixing lugs B: 83 × 112.5 × 40 mm
• Dimensions with fixing lugs C: 105 × 112.5 × 40 mm
• Weight: approx. 200 g
• Software: SW67416
• ORDER CODE: HD67416-E4V

Configurator – Software SW67416 FREE DOWNLOAD

Manufacturer's warranty: 24 months

---