TRB145
Shipping 24h
Test for Free!
Industrial energy-saving TRB145 LTE network gateway with RS485 interface for remote management.
Compact design and easy installation, the TRB145 is ideal for applications where one component needs to be remotely controlled via the RS485 serial interface. This device is characterized by very low power consumption and small size in an aluminum housing with the possibility of mounting on a DIN rail or a flat surface. This TRB145 LTE gateway is designed to operate in the temperature range from -40°C to 75°C and has an IP30 degree of protection.
The TRB145 LTE Gateway like TRB's other products, has been designed for use in industrial facilities with demanding environments and therefore has a wide range of software features such as SMS control, Firewall, Open VPN,IPsec, Teltonika Networks' Remote Management System (RMS) and FOTA support.
Specification:
Mobile
- Mobile module: 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
- Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
- SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- USSD: Supports sending and reading Unstructured Supplementary Service Data messages
- Black/White list: Operator black/white list
- Multiple PDN: Possibility to use different PDNs for multiple network access and services
- Band management: Band lock, Used band status display
- APN: Auto APN
- Bridge: Direct connection (bridge) between mobile ISP and device on LAN
- Passthrough: Router assigns its mobile WAN IP address to another device on LAN
Network
- Routing: Static routing
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT
- VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- Firewall: Port forward, traffic rules, custom rules
- DHCP: Static and dynamic IP allocation, DHCP Relay, Relayd
- QoS/Smart Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNS: Supported >25 service providers, others can be configured manually
- Network backup: Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
- SSHFS: Possibility to mount remote file system via SSH protocol
Security
- Authentication: Pre-shared key, digital certificates, X.509 certificates
- Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN: Port and tag based VLAN separation
- Mobile quota control: Custom data limits for SIM card
- WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
- OpenVPN Encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- IPsec: IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
- GRE: GRE tunnel
- PPTP, L2TP: Client/Server instances can run simultaneously, L2TPv3 support
- Stunnel: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPN: Method of building scalable IPsec VPNs
- SSTP: SSTP client instance support
- ZeroTier: ZeroTier VPN client support
- WireGuard: WireGuard VPN client and server support
Input/Output
- Input: 1 x Digital Input, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high
- Output: 1 x Digital Output, Open collector output, max output 30 V, 300 mA
- Output control: HTTP POST/GET, Schedule
- Events: Email, RMS, SMS
- I/O juggler:Allows to set certain I/O conditions to initiate event
Power
- Connector: 4-pin industrial DC power socket
- Input voltage range: 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
- Power consumption: < 5 W
Interfaces
- I/O’s: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
- Status LEDs: 3 x connection type status LEDs, 5 x connection strength LEDs, 1 x Power LED
- SIM: 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
- Power: 1 x 4-pin power connector
- Antennas: 1 x SMA for LTE
- RS485: 1 x 6-pin terminal block for 2-wire or 4-wire interface
- USB: 1 x Virtual network interface via micro USB
- Reset: Reboot/User default reset/Factory reset button
Physical
- Casing material: Aluminum housing
- Dimensions (W x H x D): 74.5 x 25 x 64.4 mm
- Weight: 130g
- Mounting options: Bottom and sideways DIN rail, Flat surface
- Operating temperature: -40 °C to 75 °C
- Operating humidity: 10% to 90% non-condensing
- Ingress Protection Rating: IP30
Warranty: 2 years
Certificates: CE/RED, EAC, RoHS, WEEE
General technical parameters | |
USB | 1x USB micro |
Industrial grade | |
Casing | Aluminum |
IP rating | IP30 |
Operating temperature | -40°C to 75°C |
Input voltage | 9~30VDC |
Manufacturer's warranty | 24 months |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!