Tape for connecting Modbus I / O modules SLIM series. Tape for connecting SLIM Modbus I / O modules through the Quick Connector slot, which is equipped with each SLIM module.Moves from module to module:Power of the individual modulesRS-485Just supply the module and RS485 power to the first module. With the MOD-QC tape, both values will be passed to the next modules...
Industrial expansion module, 2 digital inputs and 2 digital outputs on Modbus RTU, with RS485 interface. Features:INPUT/OUTPUT: 2 digital inputs/2 digital outputsOUTPUT/INPUT: RS485 - Modbus Slave (ASCII, RTU)Mount: DIN rail2 configurable 32-bit countersCounter modes: pulse counter, timer or encoderInputs of PNP or NPN type depending on the connectionPNP type outputs with maximum current up to 0.25AGalvanic isolation of inputs and outputsWatchdog..
Industrial expansion module, 4 digital inputs on Modbus RTU, with RS485 interface. Features:INPUT: 4 digital inputsOUTPUT: Interface: RS485 - Modbus (ASCII, RTU)Mount: DIN rail4 configurable 32-bit countersCounter modes: impulse counter; timer; encoderInputs of PNP or NPN type depending on the connectionGalvanic isolation of inputsLarge, convenient cable connectors (up to 2.5 mm2)Configuration: free software2 years warrantyMade in PolandThe 4DI i..
Industrial expansion module, 4 digital outputs on Modbus RTU, with RS485 interface. Features:OUTPUT: 4 digital outputsINPUT: RS485 - Modbus Slave (ASCII, RTU)Mount: DIN railOutputs type PNP, 250mAWatchdog functionComfortable connectors for cables (up to 2.5 mm2)Configuration: free Modbus Configurator2 years warrantyMade in PolandThe MOD-4DO is an innovative device that provides a simple and inexpensive extension of the output lines of popular PLC..
Industrial expansion module with 1 input for current measurement and 1 input for voltage measurement on Modbus RTU, with RS485 interface. Features:INPUT: 1 input for current measurement, 1 input for voltage measurementOUTPUT: Interface: RS485 - Modbus (ASCII, RTU)Operation of voltage input 0~10VDC; -10~+10VDC, 0~1VDC; -1~+1VDCOperation of current inputs 0~20mA, 4-20mA, -20~+20mAOne configurable PNP or NPN output (2 ways to connect) up to 250mA, s..
Industrial expansion module, 1 universal temperature input for Modbus RTU, with RS485 interface. Features:INPUT: 1 temperature input, universalOUTPUT: Interface: RS485 - Modbus (ASCII, RTU)Support for thermoresistive sensors PT100, PT500, PT1000, NI100, KTY81-110 (2 or 3 wire connection)Operation of thermocouples J, K, T, N, S, R, BTemperature measurement of connectors for cold tip terminations of thermocouplesTemperature measurement with a resol..
Industrial expansion module, 4 digital inputs with FRAM memory to Modbus RTU, with RS485 interface. Features:INPUT: 4 digital inputs with memoryOUTPUT: RS485 - Modbus Slave (ASCII, RTU)Mounting on a DIN rail4 configurable 32-bit countersFRAM - non-volatile random-access memoryCounter modes: pulse counter, timer, encoderInputs PNP or NPN, depending on the connectionGalvanic isolation of inputsComfortable connectors for cables (up to 2.5 mm2)Config..
Industrial expansion module, 16 digital inputs on Modbus RTU, with RS485 interface. The module communicates with all commercially available PLCs, devices that support the popular MODBUS MASTER protocol. The module has 16 digital inputs with counter option. In addition, the IN1 and IN2 and IN3 and IN4 terminals can be used to connect two encoders. All inputs are isolated from logic using optocouplers. Each channel can be individually configured in..
Industrial expansion module, 16 digital outputs on Modbus RTU, with RS485 interface.Features:OUTPUT: 16 digital outputs PNPINPUT: RS485 - Modbus Slave (ASCII, RTU)Mounting on a DIN railDefault configurable output states when power is turned onPNP type outputs with maximum current up to 0.5ABuilt-in protection diode - Inductive loads without additional protection (contactors, relays, pneumatic and low power hydraulic solenoid valves)LEDs for signa..
Industrial expansion module, 16 relay outputs on Modbus RTU, with RS485 interface. Features:OUTPUT: 16 relay outputsINPUT: RS485 - Modbus Slave (ASCII, RTU)Mount: DIN railDomyślnie (konfigurowalne) stany wyjść po włączeniu zasilaniaMaximum current 3A 250V AC / per COM (module has 4 terminals COM: COM1, COM2, COM3, COM4)Maximum current 3A 30V DC / per COM (module has 4 terminals COM: COM1, COM2, COM3, COM4)LEDs for signaling the status of outputs,..