3-4 days
Industrial PROFINET to CAN converter, housing type A (slim), DIN rail mount.
HD67606 allows to connect PROFINET devices (for example Siemens PLC) with CAN network. Converter is easy to install and configure thanks to SW67606 software.
Configuration:
Thanks to the SW67606 software on your PC you can:
- Define the parameters of PROFINET line
- Define the parameters of CAN line
- Define the CAN frames that the Converter can accept
- Define the CAN frames that the Converter sends through the CAN line
- Define the map of CAN byte that must be written in the PROFINET array
- Define the map of which PROFINET bytes must be written in CAN frames
- Update the device
Characteristics:
- Mountable on 35 mm DIN rail
- Up to 1440 bytes in reading and 1440 bytes in writing
- Bi-directional information exchange between CAN bus and PROFINET bus
- Triple isolation between CAN - Power Supply, CAN - Ethernet, Power Supply - Ethernet
Specifications:
- Ports: 1x CAN; 2x PROFINET
- Data Rates CAN: Up to 1Mbps
- Data Rates PROFINET: 100 Base-T Autosensing
- CAN connector: 3way 5mm terminal block
- PROFINET connector: RJ45
- Power supply: 8~24VAC; 12~35VDC
- Power supply connector: 2 way 5mm terminal block
- Operating temperature: -40° to +85° (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: 35mm DIN Rail mount
- Software: SW67606
- ORDER CODE: HD67606-A1
Configurator – Software SW67606 FREE DOWNLOAD
General technical parameters | |
Ethernet | 2x 10/100BaseT(X) |
CAN ports | 1x CAN |
Protocol support | PROFINET, CAN |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!