EISK8M-100T EOL

Industrial Managed Ethernet Switch with 8 Fast Ethernet ports.

The EISK8M Series provides standard plug-and-play features such as auto-negotiation and auto-MDIX - allowing for quick and simple installation. However, these features plus full-duplex can be individually set for each copper port. The copper ports can auto-negotiate 10Mb/s, 100Mb/s, half- or full-dupplex. With auto-MDIX, either straight-through or crossover cables may be used to connect any of the copper ports to similar ports on another switch.

In addition to one power LED and one CPU status LED, each port has LEDs showing link/activity/data rate by colour: green for 100Mb/s and yellow for 10Mb/s. Flashing indicates port activity.

The EISK8M Series is designed for DIN Rail mounting. There are several low-voltage AC or DC powering options from 24VAC or from 10~36VDC. Provisions exist for redundant power connections.

Features:

• Web page configuration
• 8 10/100BaseT(X) Ethernet ports
• Managed via the SNMP protocol
• IMGP snooping & query funcionality
• Virtual LAN support (support VLAN and 802.1Q)
• DIN-rail mounting
• 24 VAC or 10~36VDC powered

Specification:

Ethernet Communications

• IEEE 802.3 10/100 Mbps data rate
• 10/100BaseT(X) physical layer, 100m (max), CAT5 cable length

LEDs

• Power: Green = power OK
• Link:
• Green = 100 Mbps
• Yellow = 10 Mbps
• Flashing = Activity
• Status:
• Green Normal = Solid with a blink every 5s
• Fault = Continuous flashing

Power

• 10–36 VDC 5 W or 24 VAC, 10 VA 47–63 Hz

Envrionmental

• Operating temperature: 0°C to 60°C
• Storage temperature: -40°C to 85°C
• Relative Humidity: 10–95%, non-condensing

Mechanical

• Dimensions: 96 mm x 40 mm x 131 mm
• Shipping weight: 0.45 kg
• IP protection: IP30
• Mounting: TS-35 DIN Rail

Fault Relay:

• Normally open, dry contact, rated at 24V (max), 500mA

Certificates:

• CE Mark; CFR 47, Part 15 Class A; RoHS
• UL 508 Industrial Control Equipment

Manufacturer's warranty: 5 years

---