3-4 days
Industrial EtherNet/IP to NMEA 2000 converter, housing type A (slim), DIN rail mount.
HD67589 allows you to connect some NMEA2000 devices (for example fluid level sensors, management of heat and cold, lights, etc) with an EtherNetIP net (for example an ABB PLC, an Allen-Bradley PLC, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67589 software.
Configuration:
Thanks to the SW67589 software on your PC you can:
- Define the parameters of Ethernet IP line
- Define the parameters of NMEA 2000
- Determine which Ethernet IP byte transfer in NMEA 2000 and vice versa
- Update the device
Characteristics:
- Bi-directional information exchange between Ethernet IP bus and NMEA 2000 bus
- Up to 500 bytes in reading and 500 bytes in writing
- Mountable on 35 mm DIN rail
Specifications:
- Ports: 1x CAN; 1x Ethernet
- Data Rates NMEA2000: Up to 1Mbps
- Data Rates Ethernet: 10/100 Base-T Autosensing
- NMEA2000 connector: 3 way 5mm removable screw terminal
- Ethernet connector: RJ45
- Power supply: 8~24VAC; 12~35VDC
- Operating temperature: -40° to +85° (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67589
- ORDER CODE: HD67589-A1
Configurator – Software SW67589 FREE DOWNLOAD
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
CAN ports | 1x CAN |
Protocol support | NMEA2000, Ethernet IP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!