HD67C14-G43-B2 industrial DeviceNet Slave to MQTT Broker converter with LTE

HD67C14-G43-B2 – industrial DeviceNet Slave to MQTT Broker converter with LTE.

HD67C14-G43-B2 is an industrial communication converter designed to integrate devices operating in a DeviceNet network as a DeviceNet Slave with modern IoT platforms, cloud systems and SCADA applications based on the MQTT Broker architecture. The device enables reliable transmission of process data from the field level to supervisory and cloud-based systems.

The G43 version is equipped with LAN and LTE connectivity and supports a SIM card, allowing operation in locations without permanent wired Ethernet infrastructure. This makes the converter suitable for distributed installations, remote monitoring and industrial applications requiring continuous data transmission over cellular networks.

On the DeviceNet side, the converter uses a CAN interface and supports data rates up to 1 Mbps. MQTT communication is handled via the RJ45 Ethernet interface with 10/100 Base-T Autosensing as well as through the LTE cellular network. Galvanic isolation between Ethernet and power supply increases resistance to electrical noise and improves operational safety in industrial environments.

The compact B2 Modulbox enclosure is designed for installation on a DIN 35 mm rail. The device operates in a wide temperature range from -40°C to +85°C, while its compact dimensions 70 × 60 × 95 mm allow installation in space-constrained control cabinets.

Key features

• Integration of DeviceNet Slave devices with MQTT Broker.
• Ethernet and LTE (SIM) connectivity.
• DeviceNet data rates up to 1 Mbps.
• 10/100 Base-T Autosensing Ethernet interface.
• Flexible mapping of DeviceNet data to MQTT topics.
• Galvanic isolation between Ethernet and power supply.
• Industrial enclosure for DIN rail mounting.

Device configuration and commissioning are performed using dedicated software SW67C14 , which allows configuration of DeviceNet parameters, MQTT communication settings, data mapping and firmware updates.

Technical specifications

• Protocols: DeviceNet Slave, MQTT Broker
• Ports: 1× CAN (DeviceNet), 1× Ethernet RJ45, SIM slot
• DeviceNet connector: 3-way 5 mm terminal block
• DeviceNet data rate: up to 1 Mbps
• MQTT data rate: 10/100 Base-T Autosensing
• Power supply: 8…24V AC or 12…35V DC
• Power connector: 2-way 5 mm terminal block
• Operating temperature: -40°C to +85°C
• Dimensions: 70 × 60 × 95 mm (D × W × H)
• Weight: approx. 200 g
• Mounting: DIN rail
• Software: SW67C14
• Order code: HD67C14-G43-B2

HD67C14-G43-B2 is a reliable solution for integrating DeviceNet-based field devices with MQTT-based IoT architectures, particularly in applications requiring LTE connectivity and stable operation in harsh industrial environments.

Need technical support or assistance with device selection? Contact Consteel Electronics .