Menu
Your Cart

HRT-711 CR

HRT-711 CR
HRT-711 CR
HRT-711 CR
HRT-711 CR
HRT-711 CR
Warranty 12 months 2-3 weeks
HRT-711 CR
HRT-711 CR
HRT-711 CR
HRT-711 CR
HRT-711 CR
HRT-711 CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: HRT-711 CR
2,486.30 zł
2 pieces or more 2,411.71 zł
5 pieces or more 2,337.12 zł
10 pieces or more 2,262.53 zł
26 pieces or more 2,187.94 zł
51 pieces or more 2,113.36 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

Industrial Modbus TCP to HART Converter.

The HRT-711 is a new Modbus/TCP to HART Gateway. It allows the Modbus/TCP Master to access the HART Slave devices. These HART devices may be a transmitter, an actuator, a current output device and so forth. By using the HRT-711, users can integrate their HART devices into Modbus network easily. Therefore, HRT-711 can be a powerful gateway to exchange the data between Modbus and HART network. Moreover, the HRT-711 can be applied in the various hard environments because its high isolation protection designs. This design makes users to apply widely application for the remote data acquisition, control, process automation, and factory automation, etc.

Features:

  • HART (Master) to Modbus TCP (slave) Gateway
  • Allows two Modbus TCP Clients
  • Connect up to 15 HART modules
  • Working in point-to-point or multi-drop HART mode
  • Support HART Short/Long frame
  • Support HART Burst mode
  • Firmware update via Com Port
  • Built-in Watchdog
  • Replacement of HART devices during on-line operations
  • Mountable on DIN Rail

Manufacturer's warranty: 12 months


General technical parameters
Ethernet1x 10/100BaseT(X)
HART ports1x HART
Serial port1x RS-232
Protocol supportHART, Modbus TCP
Industrial grade
Operating temperature-25°C to 75°C
Input voltage10~30VDC
MountDIN rail

Write a review

Note: HTML is not translated!
Bad Good
1