I-2533 CR
2-3 weeks
Industrial CAN to Fiber Bridge, multi mode, 2km, ST connector.
The I-2533 is an intelligent CAN bridge that can be used to establish the connection between two CAN bus systems via fiber optic cable. Similar to the I-2532, the I-2533 can also apply in various CAN-based protocols to convert CAN bus signals to optical signals and reshape the CAN signals. The difference between the I-2532 and I-2533 is the CAN configuration functions and the distance limitation of CAN communication.
The I-2533 offers the functions to configure the CAN baud rate and CAN message filters. These are useful when using the I-2533 to link two CAN networks which may have different baud rates. By using the I-2533, the transmission distance limitation of the CAN bus system will not be reduced because of the CAN baud rate, which means that the total network length can be extended. This feature means that users can develop the applications more powerful and flexible with the I-2533.
Features:
- Fiber Port: ST - Multi-mode - Wave Length: 850 nm
- Up to 100 CAN nodes on the CAN channel
- Transmission distance up to 2 km at any CAN baud rate
- 2500 Vrms isolation on the CAN side
- 3 kv galvanic isolation between the power supply and CAN channel
- Fully compatible with the ISO 11898-2 standard
- Rotary switch for CAN baud rate configuration
- Built-in switch to select 120Ω terminal resistor
- Utility tool for message filter configuration
- DIN-Rail mount
Manufacturer's warranty: 12 months
General technical parameters | |
CAN ports | 1x CAN |
Fiber mode | Multi-mode |
Fiber | 1x 10/100Base-FX |
Protocol support | CAN |
Industrial grade | |
Optoisolation | 3000VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!