2-3 weeks
1 Port Programmable DeviceNet Master Interface.
The I-87124 can represent an economic solution of DeviceNet application and be a DeviceNet master device on the DeviceNet network. I-87124 supports Group 2 and UCMM functions to communication with slave devices. It can be installed in ViewPAC or WP-8000 series PAC. It is popularly applied in the industrial automation, building automation, vehicle, and embedded control network.
There is a complete DeviceNet protocol firmware in the I-87124. The users can easily access the slave device via I-87124 in the ViewPAC and WP-8000 and need not to deal with the complex DeviceNet protocol. The uses can use as easy as “Read/Write” functions to access slave I/O data.
Features:
- 3 indication LEDs (Error, Status, Bus LEDs)
- 1kVDC isolation on CAN side
- Programmable master MAC ID
- Programmable transfer-rate 125K, 250K, 500K
- Support maximum nodes up to 64
- Support Group 2 Only Server functions
- The maximum Fragment number is (Input/Output) up to 64
- Support I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic
- Support auto-scan slave device function
- Support on-line add device into and remove device from network
- Support boot-up communicate with slave devices automatically
Warranty: 12 months
Certifications: CE, FCC Class A
General technical parameters | |
CAN ports | 1x CAN |
Protocol support | DeviceNet |
Industrial grade | |
Optoisolation | 3000 VDC, 2500 Vrms |
Operating temperature | -25°C to 75°C |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!