Menu
Your Cart

IBOX-MBS-DALI

IBOX-MBS-DALI
IBOX-MBS-DALI
5-7 days
IBOX-MBS-DALI
IBOX-MBS-DALI
IBOX-MBS-DALI
  • Stock: 5-7 days
  • Brand: Intesis
  • Model: IBOX-MBS-DALI
Product Views: 12405
2 528,93 zł

Available Options

DALI to Modbus Gateway.

The IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of DALI ballasts from a Modbus BMS, SCADA, PLC or any other device working as a Modbus Master.

The aim of this device is:
  • Providing a DALI physical channel with the necessary bus voltage (about 15V) and current regulation (max. 250mA).
  • Setting the proper configuration values of the DALI ballasts (addresses, groups, max/min levels...).
  • Performing control and monitoring of the DALI ballasts in the DALI bus from a Modbus-based control system, so that the ballasts become part of the own Modbus system.
Once set up, the gateway acts as a Modbus Server (slave) device in its Modbus interface, allowing other Modbus client (master) devices reading or writing its internal Modbus registers. These registers provide control of the DALI ballasts connected to IntesisBox.

Specification:

Ports:

  • Ethernet port (Modbus IP, device config): 1x Ethernet 10BT RJ45
  • Modbus RTU ports:
    • 1x Serial RS232 (DB9 male DTE)
    • 1x Serial RS485 (Plug-in screw terminal block 2 poles)
  • DALI port: 1x DALI electrically isolated (2-pole plug-in terminal block)
  • Console port: EIA232. DB9 female connector (DCE) (also allows configuration and upgrades firmware)

Power:

  • Connector: 2 poles plug-in terminal block
  • Input Voltage: 24 Vdc 250 mA
  • DALI bus power source: 15Vdc +/-2% 150mA (DALI bus is powered from IntesisBox)

System Control & Monitoring:

  • LED indicators:
    • 1x Power
    • 2x DALI activity (Tx, Rx)
    • 2x Modbus RTU port activity (Tx, Rx)
    • 2x Ethernet port activity (Link, Act.)
    • 1x DALI bus power
    • 1x DALI test
  • Push buttons: 1x DALI test

Mechanical Characteristics:

  • Construction: Plastic, type PC (UL 94 V-0)
  • Dimensions: 159mm x 105mm x 58mm
  • Color: Light Grey. RAL 7035
  • Protection: IP20 (IEC60529)
  • Mounting:
    • Wall
    • DIN rail EN60715 TH35

Environmental Characteristics:

  • Operation Temperature: 0°C to 60°C
  • Humidity: 25% to 90% at 50°C, non condensing

Certifications:

  • CE
  • RoHS conformity: Compliant with RoHS directive (2002/95/CE)

Warranty: 36 months

Ordering Information:

  • INMBSDAL0640000 (old code INMBSDAL0640000) - Modbus Server TCP & RTU - DALI (64 devices, 1 channel)
  • INMBSDAL1280000 (old code INMBSDAL1280000)- Modbus Server TCP - DALI (128 devices, 2 channels)
DALI to Modbus Gateway aplication

Write a review

Note: HTML is not translated!
Bad Good
We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.