Menu
Your Cart

WISE-7560M CR

WISE-7560M CR
WISE-7560M CR
WISE-7560M CR
WISE-7560M CR
Warranty 12 months 2-3 weeks
WISE-7560M CR
WISE-7560M CR
WISE-7560M CR
WISE-7560M CR
WISE-7560M CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: WISE-7560M CR
1,391.20 zł
2 pieces or more 1,349.46 zł
5 pieces or more 1,307.73 zł
10 pieces or more 1,265.99 zł
26 pieces or more 1,224.26 zł
51 pieces or more 1,182.52 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

MQTT PoE I/O Module with 6 Power Relays, 6 Digital Inputs and 2-port Ethernet Switch.

WISE-7560M provides 6 wet contact digital input channels and 6 form A electromechanical relays. It features optical isolation for 3000 VDC of transient overvoltage protection and doesn’t have channel-to-channel isolation. Note: When inductive loads are connected to the relays, a large counter electromotive force may occur when the relay actuates because of the energy stored in the load. These flyback voltages can severely damage the relay contacts and greatly shorten the relay life. Limit these flyback voltages at your inductive load by installing a flyback diode for DC loads or a metal oxide varistor for AC loads. WISE-7560M follows IEEE 802.3af-compliant Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs. In additional to this, WISE-7560M also has a built-in two-port Ethernet switch to implement daisy-chain topology. The cabling is much easier and total costs of cable and switch are significantly reduced.

By integrating with IF-THEN-ELSE rule engine, WISE-7560M provides powerful functions such as I/O Monitoring/Control, Counter, Timer, Schedule, E-mail sending & CGI Command sending for use in various industrial applications. WISE-7560M also supports Modbus TCP and MQTT protocols to make seamless integration with SCADA, IT and IoT (Internet of Things) system.

Features:

  • Runs on browsers, no extra software tool is required
  • No more programming, Web pages provided for control logic editing
  • IF-THEN-ELSE logic rules execution ability
  • Built-in I/O (Relay: 6 Channels; DI: 6 Channels)
  • Support I/O Monitoring/Control, Counter, Timer, Schedule, Email sending and CGI Command sending operations
  • Modbus TCP Protocol for SCADA System Integration
  • IEEE 802.3af-compliant Power over Ethernet (PoE)
  • 2-port Ethernet Switch for Daisy-Chain Topology
  • MQTT Protocol for IT & IoT (Internet of Things) System Integration

Manufacturer's warranty: 12 months

Certificates: CE, FCC


General technical parameters
Ethernet2x 10/100BaseT(X) PoE
I/O6x digital inputs, 6x relay outputs
Protocol supportMQTT, Modbus TCP
Industrial grade
Optoisolation2500 VDC
Operating temperature-25°C to 75°C
Input voltage12~48VDC, Port powered
MountWall mount

Write a review

Note: HTML is not translated!
Bad Good
1