WISE-7117 CR

Ethernet PoE I/O Module with 8 Analog Inputs with High Voltage Protection and 4 Isolated Digital Outputs.

WISE-7117 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7117 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.

WISE-7117 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel differential analog inputs and 4-channel digital ouputs. Each analog channel is allowed to configure an individual range and has 240Vrms high over voltage protection. Jumper selectable for voltage or current input.

Features:

• 1x 10/100 Base-TX Ethernet
• Built-in Web Server for IF-THEN-ELSE rule setting
• Built-in IF-THEN-ELSE rule enigne for logic operation
• Rules, I/O, CGI, Counter, Timer, Email settings edited upon Web browser
• Modbus/TCP Protocol for Integration in SCADA Software
• 8 Analog Input channel (Voltage, Current)
• 4 channel Digital Output
• Over Voltage Protection is up to 240 Vrms
• Power over Ethernet (PoE) or external DC power supply unit
• Wide Operating Temperature Range: -25°C ~ +75°C

Manufacturer's warranty: 12 months

Certificates: CE, FCC

---