IN771AIR00LO000 – Panasonic to KNX Gateway for ECOi, ECOg, PACi Integration
IN771AIR00LO000 is Panasonic to KNX Gateway for ECOi, ECOg, PACi Integration, temp. 0…+60°C, DIN rail, power 12–36VDC, cert CE/UL.
- Stock: 5-7 days
- Brand: Intesis
- Model: IN771AIR00LO000
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
Gateway for up to 128 Panasonic ECOi/ECOg/PACi Indoor Units & 64 Outdoor Units.
The IN771AIR00LO000 interface delivers full, bidirectional integration of Panasonic ECOi, ECOg and PACi VRF systems with any KNX-based BMS or home-automation installation. One compact gateway handles up to 128 indoor units and 64 outdoor units, providing real-time control of temperature set-points, fan speeds, operating modes and error status directly from KNX visualisation panels or logic modules.
By tapping directly into the outdoor unit’s communication bus, the device guarantees low-latency access to every critical VRF parameter. The built-in auto-scan function detects all connected units in seconds, automatically creates KNX datapoints and eliminates manual address mapping—cutting commissioning time by more than 70 %.
Power users benefit from a huge library of KNX standard datapoints (DPT 1, 5, 9 etc.) covering energy-consumption impulses, outdoor temperatures, discharge pressures and more. These datapoints plug straight into trend logs, dashboards and energy-billing engines without custom scripting.
Kluczowe korzyści
- Plug & Play: auto-scan discovers all indoor/outdoor units w < 5 min
- Energetyka: indywidualne dane zużycia kWh dla każdej jednostki
- Kompatybilność KNX: obsługa wszystkich popularnych DPT-ów
- Szybka konfiguracja: port IP lub USB + Intesis MAPS
- Aktualizacje OTA: firmware bramki i MAPS pobierane automatycznie
- Bezpieczeństwo: izolowany port RS-485, galwaniczna separacja 1 500 VDC
- Certyfikat CE & UL + 36-miesięczna gwarancja producenta
Parametry techniczne
Protokoły & interfejsy:
- KNX TP1 – 2-pin terminal (A/B)
- Ethernet 10/100 Mbps RJ45 – konfiguracja & aktualizacje
- USB mini-B – lokalna konsola serwisowa
Zasilanie:
- 12–36 V DC ±10 % / 24 V AC ±10 %
- Pobór max.: 250 mA DC lub 127 mA AC
Obudowa & montaż:
- PC UL 94 V-0, 90 × 106 × 58 mm, IP20
- Montaż: ściana (M3 × 25 mm) lub szyna DIN TH35
Środowisko pracy:
- Temperatura: 0 °C – +60 °C
- Wilgotność: 5 % – 95 %, bez kondensacji
Potrzebujesz listy datapointów lub przykładowego projektu MAPS? Skontaktuj się z nami przez formularz kontaktowy.
