INMBSPAN001A000 Panasonic Aquarea Air-to-Water to Modbus RTU RS-485 gateway for BMS integration
INMBSPAN001A000 is Panasonic Aquarea Air-to-Water to Modbus RTU RS-485 gateway for BMS integration, temp. 0…60°C, cert UL.
- Stock: 5-7 days
- Brand: Intesis
- Model: INMBSPAN001A000
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
Panasonic Air-to-Water communication module with Modbus interface.
The IntesisBox INMBSPAN001A000 (or PAW-AW-MBS-H according to Panasonic reference) provides fully bi-directional communication with Panasonic Aquarea H Air-to-Water systems. Control and monitor system functions and parameters from Modbus RTU (RS-485).
New code: INMBSPAN001A000
Technically identical product – only the name / SKU has changed.
INMBSPAN001A000 is an integration gateway that exposes Panasonic Aquarea H to BMS and industrial automation environments where Modbus RTU is the standard fieldbus. This allows the Air-to-Water system to be handled by PLCs, SCADA platforms, and supervisory controllers in a structured way—using the same RS-485 network for commands and feedback.
The gateway is connected directly to the Hydro indoor unit through a dedicated connector and special cable (included). On the supervisory side, communication is provided via EIA-485 (terminals A and B). The interface supports true bi-directional data exchange, enabling not only control of key functions but also continuous monitoring of faults, alarms and selected internal variables—useful for diagnostics, reporting, and automation logic.
Commissioning is fast and straightforward: wire the Aquarea side and RS-485, then set the DIP switches (Hydro functions, Modbus RTU settings and additional features). No dedicated configuration software and no external power supply are required, which simplifies installation in control cabinets and shortens overall integration time.
Ports:
- Modbus RTU port:
- 1x EIA485 screw terminal block (2 poles): A, B
- Compatible with Modbus RTU EIA-485 networks
- Hydro unit port: 1x specific connector (special cable included)
- Switch 1: 1x DIP switch for Hydro unit functions
- Switch 3: 1x DIP switch for Modbus RTU settings
- Switch 4: 1x DIP switch for additional functions
Mechanical:
- Enclosure: plastic, PC type (UL 94 V-0)
- Dimensions: 93mm x 53mm x 58mm
- Color: light grey, RAL 7035
- Weight: 85g
- Isolation voltage: 1500VDC
- Insulation resistance: 1000 MΩ
- Protection degree: IP20 (IEC60529)
Environmental:
- Operating temperature: 0°C to 60°C
- Storage temperature: -20°C to 85°C
- Humidity: <90%, non-condensing
Warranty: 36 months
Ordering information: INMBSPAN001A000
Product code: INMBSPAN001A000