M-7016 CR
2-3 weeks
2-channel Strain Gauge Input industrial Module using the DCON and Modbus Protocols.
The I-7016 not only can process the module data from a load cell or a strain gauge, it also features linear mapping that can be used to directly convert the resulting data into weight via a user-defined correspondent table. The I-7016 supports full-bridge strain gauges and provides 2 Analog Input channels, 1 excitation voltage output channel, 2 Digital Input channels and 2 Digital Output channels.
The module provides a programmable input range (±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, and ±2.5 V) and each Analog Input channel can be individually configured. Excitation voltage output can be in the range of 0 ~ +10 V, with a 40 mA driving efficiency. Digital Output channels can also be set as high or low alarm outputs. The M-7016 supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7016.
Features:
- 2-channel Strain Gauge Measurement
- High Resolution: 16-bit
- Excitation Voltage Output: 0 ~ 10V
- 50 Hz Event Counter for Digital Input
- High/Low Alarm for Digital Output
- Linear Mapping Function
- 3000 VDC Intra-Module Isolation
- Dual Watchdog
- Wide Operating Temperature Range: -25 ~ +75°C
- DIN rail mount
General technical parameters | |
I/O | 2x analog inputs, 1x voltage output, 2x digital inputs, 2x digital outputs |
Protocol support | DCON, Modbus RTU |
Industrial grade | |
Optoisolation | 1500VDC |
Operating temperature | -25°C to 75°C |
Input voltage | 10~30VDC |
Mount | DIN rail, Wall mount |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
modbus
, dcon
, ethernet
, icpdas
, M-7016
, Modbus RTU (RS-485)
, DCON (RS-232/485
, Ethernet)