Menu
Your Cart

EIDX16M-100TF EOL

EIDX16M-100TF EOL
5-10 days
EIDX16M-100TF EOL
  • Stock: 5-10 days
  • Model: EIDX16M-100TF
6 565,90 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

Industrial Managed Ethernet Switch with 14 Fast Ethernet ports, 2 fibre ports and wide operating temperature range from -40°C to 75°C.

The EIDXM Series of Ethernet switches provide management functionality in situations where extended temperatures of -40°C to +75°C are expected. With a fixed width of 62 mm, these units offer 16 or 24 ports with copper and fiber/copper combinations. In addition to the conventional features standard in Plug-and-Play switches, the EIDXM Series offers many important managed-switch benefits. These benefits includes IGMP snooping and IGMP query, RapidRing®, VLAN, Quality of Service (QoS), port mirroring, rate limiting, trunking, port security, the Simple Network Management Protocol (SNMP), and the Rapid Spanning Tree Protocol (RSTP).

Configure the unit by web browser via any Ethernet port-or in terminal mode via the local console port. Using either of these methods, port parameters, feature configuration and device status can be monitored and/or modified. A configurable relay is present for attaching fault-monitoring equipment.

The unit can be either DIN-rail or panel mounted and can be powered from a 24 VAC/VDC power source. A N.O. contact is available for signaling a fault condition to external equipment.

Features:

  • 14 10/100BaseT(X) Ethernet ports and 2 100Base-FX fibre ports
  • Extended temperature range: –40°C to +75°C
  • Console or web page configuration
  • Quality of Service (QoS) support (802.1p, DiffServ, TOS, Port-based, MAC-based)
  • Managed via the SNMP protocol
  • Port mirroring, rate limiting and port security

Specification:

Ethernet Communications

  • IEEE 802.3 10/100 Mbps data rate
  • 10BASE-T, 100BASE-TX physical layer, 100 m (max) CAT5 cable length

Fibre Communications

  • 100BASE-FX physical layer, 2 km (max) multimode cable
  • 100BASE-FX physical layer, 15 km (max) single mode cable

Console Communication

  • EIA-232 DTE (9600, 1, 1)

LEDs

  • Power: Green
  • Port LEDs:
    • Green = 100 Mbps link present; flashes with activity
    • Yellow = 10 Mbps link present; flashes with activity
  • Status:
    • Green = Processor status OK
    • Red = Processor status fault

Power

  • Input voltage: 24VDC / 24VAC
  • Input power (max): 13W / 35VA

Envrionmental

  • Operating temperature: -40°C to 75°C
  • Storage temperature: -40°C to 85°C
  • Relative Humidity: 10–95%, non-condensing

Mechanical

  • Dimensions: 139 mm x 62 mm x 192 mm
  • IP protection: IP30
  • Mounting: Panel mount or DIN rail mount

Manufacturer's warranty: 36 months

Free BlueEyes View central network management and monitoring software. More information can be found HERE


General technical parameters
Ethernet14x 10/100BaseT(X)
Serial port1x RS-232
Fiber modeSingle-mode, Multi-mode
Fiber2x 10/100Base-FX
Industrial grade
IP ratingIP30
Operating temperature-40°C to 75°C
Input voltage24VDC, 24VAC
Manufacturer's warranty36 months
MountDIN rail

Write a review

Note: HTML is not translated!
Bad Good
1