IN770AIR00MO000

Intesis multi-brand AC interface with KNX, Serial and IP support - Up to 100 groups

The Mitsubishi Electric Application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC or any other device working as a Modbus Master. The solution allows the integration of up to 100 groups from a single Interface.

Features:

• The interface is able to manage Modbus TCP and Modbus RTU simultaneously
• Scan: Automatic identification of the units presents on the VRF system
• Energy consumption signals from each indoor unit are available
• Outdoor unit’s signals available for the integration
• Integration with any IP Home Automation System thanks to our open ASCII protocol
• Compatible with the drivers available at Intesis webpage
• Direct ethernet connection to the home’s local IP network
• Up to 6 TCP clients (incoming sockets) are supported
• Configuration through IP or USB (Console) port
• Easy integration with Intesis MAPS
• Automatic updates for both Intesis MAPS and interface’s firmware

Specifications:

Enclosure:

• Plastic, type PC (UL 94 V-0)
• Net dimensions (dxwxh): 90x106x58 mm / 3.5x4.2x2.3"
• Recommended space for installation (dxwxh): 130x115x100 mm/ 5.1x4.5x3.9"
• Color: Light Grey. RAL 7035

Mounting:

• Wall: M3 25 mm (1”) length screws, below 2 meters (6 feet)
• DIN rail EN60715 TH35

Terminal wiring:

Per terminal: solid wires or stranded wires (twisted or withferrule)
• 1 core: 0.5 to 2.5mm2 (24 to 11 AWG)
• 2 cores: 0.5 to 1.5mm2 (24 to 15 AWG)
• 3 cores: not permitted
For distances longer than 3.05 meters (10 feet), use lass 2 cables

Power:

1 x Green pluggable terminal block (3 poles)
• 12 to 36 VDC +/-10%, Max.: 250 mA.
• 24 VAC +/-10% 50-60 Hz, Max.: 127 mA
Recommended: 24 VDC

Ethernet:

• 1 x Ethernet 10/100 Mbps RJ45

Port EIA 485:

• 1 x Green pluggable terminal block (3 poles)SGND (Reference ground or shield)
• 1500VDC isolation from other ports

Port KNX:

• 1 x Orange pluggable terminal block (2 poles)A, B

Ports AC:

• AC Port A: Serial 2 poles (Not used)
• AC Port B: Serial 3 poles (Not used)
• AC Port C: Serial 2 poles (Not used)

LEDs:

• 2 x Run(Power/Error)
• 2 x Port EIA-485 TX/RX
• 2 x Port KNX TX/TR
• 1 x Button indicator
• 2 x Ethernet Link/Speed
• 2 x AC-Port A TX/RX
• 2 x AC-Port B TX/RX
• 2 x AC-Port C TX/RX

Binary Inputs:

• 1 x Green pluggable terminal block (4 poles)I1, I2, I3, and Common
• 1500 VDC isolation from other ports

Console Port:

• Mini Type-B USB 2.0 compliant 1500 VDC isolation

Environmental:

• Operational Temperature: 0 to +60°C
• Operational Humidity: 5 to 95%, no condensation
• Protection: IP20 (IEC60529)

Warranty: 36 months

---