INBACKNX1000000

BACnet to KNX Gateway 100 points.

The INBACKNX1000000 IntesisBox Gateway has been specially designed to allow bidirectional control and monitoring of all parameters and functionalities of a KNX installation from a BMS, SCADA or any other device working as a BACnet client.

The aim of this integration is to make accessible KNX system signals and resources from a BACnet/IP based control system or device, as if it was a part of the own BACnet system and vice-versa. For this, the gateway acts as a BACnet/IP Server device in its BACnet interface, allowing other BACnet/IP devices to perform subscription (COV) requests, and also read and write its internal points.

Specification:

Ports:

• BACnet/IP port: 1x Ethernet 10BT RJ45
• KNX (EIB) port: 1x KNX TP1 (EIB) opto-isolated, 2-poles plug-in screw terminal block
• Console port: RS232. DB9 female connector (DCE) (also allows configuration and upgrades firmware)

Power:

• Connector: 2 poles plug-in terminal block
• Input Voltage: 9 to 30Vdc +/-10% 1.4W; 24Vac +/-10% 1.4VA

System Control & Monitoring:

• Button: 1x KNX programming
• LED indicators:
• 1x Power
• 2x KNX port activity (Tx, Rx)
• 2x Ethernet port link and activity (LNK, ACT)
• 1x KNX programming/bus

Mechanical Characteristics:

• Construction: Plastic, type PC (UL 94 V-0)
• Dimensions: 107mm x 105mm x 58mm
• Color: Grey. RAL 7035
• Protection: IP20 (IEC60529)
• Mounting:
• Wall
• DIN rail EN60715 TH35
• RoHS conformity: Compliant with RoHS directive (2002/95/CE)

Environmental Characteristics:

• Operation Temperature: 0°C to 70°C
• Humidity: 5% - 95%, non condensing

Warranty: 36 months

Certifications: CE

The old device INBACKNX1000000 code is IBOX-BAC-KNX

---