INBACKNX3K00000 – BACnet/IP to KNX Gateway for 3000 Points
INBACKNX3K00000 is a High-capacity BACnet/IP to KNX gateway with 3000 points. DIN mount, COV support, web configuration.
5-7 days
INBACKNX3K00000 – BACnet/IP to KNX Gateway for 3000 Points
- Stock: 5-7 days
- Model: INBACKNX3K00000
0,00 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Additional discounts for registered customers.
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates and Test Reports (if available for the model)
BACnet/IP to KNX Gateway for 3000 points.
The INBACKNX3K00000 gateway by Intesis (HMS Networks) is a high-performance solution engineered to enable bidirectional communication between BACnet/IP and KNX TP systems. With support for up to 3000 datapoints, this gateway is ideal for complex and large-scale building automation projects where reliable protocol translation is essential.
Acting as a BACnet/IP Server, the gateway exposes KNX group addresses as BACnet objects, allowing full access to read and write operations. It enables building management systems (BMS), SCADA platforms, and other BACnet clients to fully integrate KNX installations — including lights, HVAC, shutters, sensors, and more — within a unified automation environment.
The COV (Change of Value) subscription support significantly improves system responsiveness by allowing BACnet clients to be automatically updated when changes occur in the KNX network. This greatly reduces network traffic and latency in time-critical systems.
Configuration is flexible and user-friendly. Users can access a web-based interface for setup and diagnostics, or use the RS232 console port for firmware upgrades and manual configuration. The device’s industrial-grade design, compact form factor, and DIN rail compatibility make it easy to deploy in control cabinets or panel installations.
Key Features:
- Supports 3000 KNX datapoints – ideal for large building automation systems
- Bidirectional translation between BACnet/IP and KNX TP1
- COV support – efficient real-time synchronization
- Web-based configuration and RS232 console for updates
- Industrial housing with DIN rail or wall mounting
- Certified for CE and RoHS compliance
Technical Specifications:
Ports:
- BACnet/IP: 1x Ethernet 10BT RJ45
- KNX (EIB): 1x opto-isolated KNX TP1, 2-pole screw terminal block
- Console: RS232 DB9 female connector (DCE) – also for firmware upgrades
Power Supply:
- Connector: 2-pole screw terminal
- Input Voltage: 9–30 VDC ±10% / 24 VAC ±10%
- Power Consumption: 1.4W / 1.4VA
System Monitoring & Indicators:
- 1x KNX programming button
- LED indicators:
- 1x Power
- 2x KNX activity (Tx, Rx)
- 2x Ethernet link & activity (LNK, ACT)
- 1x KNX bus/programming
Mechanical Properties:
- Housing: PC Plastic (UL 94 V-0)
- Dimensions: 107 × 105 × 58 mm
- Color: Grey (RAL 7035)
- Protection: IP20 (IEC60529)
- Mounting: Wall or DIN rail EN60715 TH35
- RoHS Compliant
Environmental Conditions:
- Operating Temperature: 0°C to 70°C
- Humidity: 5% – 95%, non-condensing
Certifications & Warranty:
- CE Certified
- Warranty: 36 months
Legacy Product Code:
- IBOX-BAC-KNX
