HD67562 PROFIBUS Slave to Modbus RTU Slave Converter DPV0 DIN rail

Industrial PROFIBUS slave to Modbus RTU slave converter, PROFIBUS DP DPV0 support, housing type A (slim), DIN rail mount. 

The HD67562 is a reliable industrial gateway that enables seamless integration between a Modbus RTU master network and a PROFIBUS DP master system. This converter is particularly useful in mixed-protocol environments where devices from different manufacturers need to communicate efficiently without replacing existing infrastructure. By acting as a transparent bridge between the two networks, it ensures that process data can be exchanged in real time with minimal latency.

It is designed for use in industrial automation, energy systems, production lines, and process control applications. The slim type A housing and DIN rail mount allow easy installation in control cabinets, even where space is limited. The HD67562 is robust enough to withstand challenging environments, operating in a wide temperature range from -40°C to +85°C, making it ideal for both indoor and outdoor installations.

Its ease of configuration via the free SW67562 software reduces commissioning time, allowing engineers to focus on system optimisation rather than complex setup procedures. With built-in electrical isolation between the two buses, it also improves network safety and resilience against interference and voltage spikes.

HD67562 allows to connect Modbus masters with PROFIBUS master devices (for example Siemens PLC). Converter is easy to use and configure thanks to free SW67562 sotware.

Configuration:

Thanks to the SW67562 software on your PC you can:

• Define the parameters of the Modbus line
• Define the parameters of PROFIBUS
• Define which Modbus registers to save in the PROFIBUS arrays
• Create a GSD File for integration with PROFIBUS masters
• Update the device firmware

The intuitive interface makes it possible to map Modbus registers to PROFIBUS process data precisely, ensuring that all critical information is available to the PLC or SCADA system without delays.

Characteristics:

• Electrical isolation between PROFIBUS and Modbus buses for enhanced safety
• Bi-directional data exchange between Modbus and PROFIBUS networks
• Data capacity: up to 244 bytes for reading and 244 bytes for writing
• DIN rail mountable (35 mm)
• Optimised for continuous 24/7 industrial operation

Specifications:

• Ports: 1x PROFIBUS; 1x RS232; 1x RS485
• Data Rates PROFIBUS: up to 12 Mbps
• Data Rates Serial: up to 115 Kbps
• Power supply: 8...19 V AC; 8...35 V DC
• Operating temperature: -40°C to +85°C (-40°F to +185°F)
• Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
• Weight: approx. 200 g
• Mechanical fixing: DIN Rail mount
• PROFIBUS DP DPV0 support
• Software: SW67562
• ORDER CODE: HD67562

Configurator – Software SW67562 FREE DOWNLOAD

Manufacturer's warranty: 24 months