HD67501-A1
2 year warranty
3-4 days
HD67501-A1
- Stock: 3-4 days
- Brand: ADF Web
- Model: HD67501-A1
1 287,80 zł
3 pieces or more 1 223,41 zł
10 pieces or more 1 159,02 zł
26 pieces or more 1 094,63 zł
51 pieces or more 965,85 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.
By the same series
2 year warranty
3-4 days
Brand: ADF Web
Model: HD67900-5-A1
Industrial serial RS485 to HART master converter, housing type A (slim), DIN rail mount. The HD67900-A1 allow to monitor HART devices (like Sensors, e..
1 287,80 zł
Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports
If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.
- Device User Manual
- CE Declaration of Conformity (EU Declaration of Conformity)
- Mechanical Drawings – CAD (STEP/DWG) or high-quality PDF
- Additional Certificates (if available for the model)
- Test Reports (if available for the model)
Industrial RS-232/485 to Modbus RTU converter, housing type: A (slim), DIN rail mount.
HD67501-A1 allows to interface a Modbus device with one or more generic Serial devices (like printers, barcode scanners, balance and so on). Converter is easy to install thanks to free SW67501 software.
The converter is bi-directional and allows to read the data from serial side and write the commands if necessary.
The serial messages and the commands to send will be completely configurable from Modbus side and it will be possible the interface with all the serial devices not-based on standard serial protocol.
Configuration:
Thanks to the SW67501 software on your PC you can:
- Define the parameters for the Modbus side
- Define the parameters for the Serial side
- Update the device
Characteristics:
- Electrical isolation between Power Supply / Serial port / Modbus
- Bi-directional information exchange between two buses
- Mountable on 35 mm DIN rail
Specifications:
- Ports: 2x RS-485; 1x RS-232; 1x Ethernet
- RS232 connector: D-SUB9
- RS485 connector: Terminal block
- Ethernet connector: RJ45
- Data Rates RS-232: Up to 115200 bps
- Data Rates RS-485: Up to 115200 bps
- Power supply: 8...19VAC; 8...35VDC
- Power supply connector: 2way 5mm removable screw terminal
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- DIN Rail mount
- Software: SW67501
- ORDER CODE: HD67501-A1
Configurator – Software SW67501 FREE DOWNLOAD
Manufacturer's warranty: 24 months