Search

24V 1.6A Power Supply. High power 24V 1.6A power supply + power plug. Recommended for long cable runs with several high power wireless cards.Specifiaction:Input Voltage: 110/220V 1.2AOperating Temperature: -30°C to 50°COutput Voltage: 24V 1.6A..

5V power injector for USB. 5VUSB is just injector cable, 5V power supplies must be sourced locally. Accepts DC Plug, 1.1MM x 3.5MM...

6GHz 802.11ac outdoor device with an integrated antenna for licensed band. The Dynadish 6 uses the same effective antenna design and enclosure as 5 GHz model, but this new device operates in the licensed 6GHz frequency. This means less interference than the often satura..

Sector dual-polarization 15dBi 120 degree beamwidth antenna with two RP-SMA connectors. The new sector mANT antennas are the perfect companion for the BaseBox, NetBox, NetMetal or any other outdoor wireless device. The mANT is a dual-polarization 15dBi 120 degree beamwi..

Sector dual-polarization 19dBi 120 degree beamwidth antenna with two RP-SMA connectors. The new sector mANT antennas are the perfect companion for the BaseBox, NetBox, NetMetal or any other outdoor wireless device. The mANT is a dual-polarization 19dBi 120 degree beamwi..

5GHz 802.11 a/n/ac wireless outdoor device with 720MHz CPU and 128 MB RAM. The mANTBox is based on new mANT sector antennas, but also has a wireless router built right in. Powered by the RB921 device, the mANTBox comes ready to use with everything included. The device u..

PoE injector with battery backup capability with a 12 V battery connector. It works just like a Gigabit PoE injector, but when power is lost, it switches over to the 12 V battery. Even if your power source is 28 V, the connected RouterBOARD will not reboot when the powe..

Hot Swap -48V DC telecom power supply. Hot Swap -48V DC telecom power supply, available to purchase separately for use with CCR1072. Simply remove one of the current power supplies and replace with the new PW48V-12V150W for -48V installations - simple and easy. You don'..

Radome Cover Kit. Radome Cover Kit reduces wind load, protects reflector surfaces from harsh environment, protects the antenna feed from falling objects, as well as positively affects the antenna sustainability and operational life. It's made from a special material tha..

RB2011 wall mount kit. The RB2011 wall mount kit (product code RBWMK) secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011..

PoE injector through Gigabit Ethernet port. Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device. For using with any RouterBOARD that sup..

Passive PoE injector through Ethernet port. Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing ..