Home use router with LTE modem and 1x LAN - TCR100

This industrial router features advanced 4G LTE CAT6 that enables cellular speeds of up to 300Mbps with carrier aggregation, dual-band WI-FI with 2.4GHz and 5.0GHz frequencies, a firewall and numerous VPN services including OpenVPN, IPsec, PPTP, L2TP and DMVPN while a powerful operating system with an intuitive OpenWrt-based user interface provides unlimited configuration options.

Specification:

Mobile

• Mobile module: 4G (LTE) – Cat 6 up to 300 Mb/s, 3G – up to 42 Mb/s
• Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, bytes sent/received, combined bandwidth, IMSI, ICCID, carrier aggregation
• By SMS: SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, automatic SMS reply, SMPP
• USSD: Supports sending and reading unstructured additional service data messages
• Blacklist/whitelist: Blacklist/whitelist of operators
• Multiple PDNs: Ability to use different PDNs for multiple network accesses and services
• Team management: Lock your band, view the status of your band in use
• APN: Automatic APN
• Bridge: Direct connection (bridge) between a mobile ISP and a device on the LAN
• Pass through: The router assigns its Mobile WAN IP address to another device on the LAN

Wireless

• Wireless Mode: 802.11b/g/n/ac Wave 2 (WiFi 5) with data rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast passthrough, access point (AP), station (STA)
• Wi-Fi Security: WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
• SSID/ESSID: ESSID hidden mode
• Wi-Fi users: up to 150 simultaneous connections
• Wireless Access Point: Captive Portal (Hotspot), Internal/External Radius Server, SMS Authentication, Internal/External Landing Page, Walled Garden, User Scripts, URL Parameters, User Groups, Individual User or Group Restrictions, User Management, 9 default customizable themes
• Wireless Features: Wireless Mesh (802.11s), Fast Roaming (802.11r), Relayd

Ethernet

• WAN: 1 x WAN port 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
• LAN: 1 x LAN port, 10/100 Mbps, compliant with IEEE 802.3, IEEE 802.3u standards, supports MDI/MDIX auto crossover

Web

• Routing: Static Routing, Dynamic Routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based Routing
• Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On (WOL)
• VoIP transit support: H.323 and SIP-alg NAT helpers, allowing VoIP packets to be routed correctly
• Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link control
• Firewall: Port forwarding, traffic rules, custom rules
• DHCP: Static and dynamic IP address allocation, DHCP relay
• QoS / Intelligent Queue Management (SQM): Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
• DDNS: >25 service providers supported, rest can be configured manually
• Network backup: Wi-Fi WAN, Mobile, Fiber, VRRP, Wired options, any of which can be used as automatic failover
• Load balancing: Balance Internet traffic across multiple WAN connections
• SSHFS: Ability to mount a remote filesystem via SSH

Security

• Authentication: Pre-Shared Key, Digital Certificates, X.509 Certificates, TACACS+, Radius, IP and Login Attempt Blocking
• Firewall: Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; demilitarized zone; NAT; NAT-T
• Attack Prevention: DDOS Prevention (SYN Flood Protection, SSH Attack Prevention, HTTP/HTTPS Attack Prevention), Port Scan Prevention (SYN-FIN, SYN-RST, X-mas, NULL Flags, FIN Scan Attacks)
• VLAN: Port and tag based VLAN separation
• Mobile control: Mobile data limit, configurable period, start time, warning limit, phone number
• WEB Filter: Blacklist to block unwanted websites, Whitelist to specify only allowed websites
• Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN: Multiple clients and server can run simultaneously, 27 encryption methods
• OpenVPN encryption: DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128 , AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
• IPsec: IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES 192GCM16 , AES256GCM16)
• GRE: GRE tunnel, GRE tunnel with IPsec support
• PPTP, L2TP: Client/server instances can run simultaneously, support L2TPv3, L2TP over IPsec
• Stunnel: A proxy server designed to add TLS encryption functionality to existing clients and servers without any changes to the program code
• DMVPN: A method for building scalable IPsec VPNs
• SSTP: Support for SSTP client instances
• ZeroTier: ZeroTier VPN Client Support
• WireGuard: WireGuard VPN client and server support
• Tinc: Tinc offers encryption, authentication, and compression on its tunnels. Client and server support

Modbus TCP Slave

• Identifier range: Reply to one identifier in the range [1;255] or any
• Allow remote access: Allow access via WAN
• Custom registers: MODBUS TCP custom register block requests that read/write a file inside the router and can be used to extend MODBUS TCP Slave functionality

Modbus TCP Master

• Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
• Supported data format: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

Server Details

• Protocol: HTTP(S), MQTT, Azure MQTT, Kinesis

MQTT Gateway

• MQTT Gateway: Enables sending commands and receiving data from MODBUS Master via MQTT broker

DNP3

• Supported modes: TCP master station, DNP3 external station

Monitoring and management

• WEB Interface: HTTP/HTTPS, Status, Configuration, Firmware Update, CLI, Troubleshooting, Event Log, System Log, Kernel Log
• FOTA: Firmware update from server, automatic notification
• SSH: SSH (v1, v2)
• SMS: SMS status, SMS configuration, sending/reading SMS via HTTP POST/GET
• Call: Reboot, Status, Mobile Data Enable/Disable, Output Enable/Disable, Answer/Hang Up with Timer, Wi-Fi Enable/Disable
• TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
• MQTT: MQTT Broker, MQTT Publisher
• SNMP: SNMP (v1, v2, v3), SNMP trap
• JSON-RPC: HTTP/HTTPS Management API
• MODBUS: MODBUS TCP Status/Control
• RMS: Teltonika Remote Management System(RMS)

IOT platforms

• Cloud of Things: Allows you to monitor: device data, mobile data, network information, availability
• ThingWorx: Allows you to monitor: WAN type, WAN IP address, mobile operator name, mobile signal strength, mobile network type
• Cumulocity: Allows you to monitor: device model, version and serial number, WAN type and IP address, mobile cell ID, ICCID, IMEI, connection type, operator, signal strength
• Azure IoT Hub: Can send device IP address, number of bytes sent/received, temperature, number of PINs to Azure IoT Hub server, mobile connection status, network link status, IMEI, ICCID, model, manufacturer, serial number, version, IMSI, SIM status, PIN status, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

System characteristics

• Processor: QCA9531, MIPS 24kc, 650 MHz
• RAM: 128 MB, DDR2
• FLASH memory: 16 MB, SPI memory

Firmware/Configuration

• WEB interface: FW update from file, check FW on server, configuration profiles, configuration backup
• PHOTO: Firmware update
• RMS: Firmware update/configuration for multiple devices simultaneously
• Saving settings: FW update without losing current configuration

Firmware Customization

• Operating system: RutOS (Linux operating system based on OpenWrt)
• Supported languages: Busybox Shell, Lua, C, C++ and Python, Java in Package Manager
• Development Tools: SDK with built environment provided

Power

• Connector: 4-pin industrial DC power jack
• Input voltage range: 9 – 30 VDC, reverse polarity protection; overvoltage protection >31 VDC 10us max
• Power consumption: Average 3.7 W, max. 9.3 W

Physical interfaces

• Ethernet: 2 RJ45 ports, 10/100 Mb/s
• LEDs: 1 x Internet, 1 x WiFi, 3 x Mobile connection strength, 2 x Ethernet status
• SIM: 1 x SIM slot (Mini SIM - 2FF), 1.8V/3V, external SIM card holder (built-in SIM variant available)
• Power: 1 x 4-pin power connector
• Antennas: 2 x SMA for LTE, 2 x internal for Wi-Fi 2.4 GHz, 1 x internal for Wi-Fi 5 GHz
• USB: 1 x USB A port for external devices
• Reset: Reboot/Reset User Defaults/Factory Reset Button
• Wi-Fi On/Off: Wi-Fi On/Off Button
• WPS: WPS activation button

Physical specifications

• Case type: Plastic case with aluminum screws and heatsink
• Dimensions (width x height x depth): 150 x 37 x 105 mm
• Weight: 376 gr
• Mounting options: Placement on a flat surface

Operating environment

• TCR100 operating temperature: -40°C to 75°C
• Humidity during operation: from 10% to 90% without condensation

Warranty: 2 years

---