Machine safety

Emergency stop relay NST-3.2Small emergency stop relay for monitoring of emergency stop and other safety arrangements.Can also be used as an inexpensive extension module, when additional output contacts are needed.Features:Safety category 3 (PLd) 3 NO safe outputs1 NC s..

Single phase power limiter OM-110 (hereinafter OM-110). OM-110 is designed for the continuous control over activeor total power capacity for the single phase loads. Measured range is from 0 to 20 kW or from 0 to 20 kVA. Thefunction of OM-110 is to cut off the power load..

OM-310 power limiter is designed for the following applications: load protection at poor parameters of the mains;complete load cutoff in case if watts input exceeds the main threshold within the user-set time period;partial load cutoff in case if watts input exceeds the..

Universal automatic electronic phase switch PEF-301. Switch is designed to supply industrial and household appliance single-phase 220V/50Hz loads from three-phase four-wire mains 3x380+N with the purpose of maintaning uninterrupted power supply of essential single-phase..

PSA: Standalone Coded Non Contact (Polyester Housing)The PSA is a standalone, non contact safety switch with its own internal monitoring system that uses two force guided mechanical contacts, maintaining PLe/Cat4 (ISO13849-1) even when switches are connected in series. ..

The Novatek REV-201M is designed for the timed switching of either 240V / 50Hz AC or 24-100V DC electrical circuits. It has 2 independent channels. Each of which can operate in 4 modes with user presets:Switch on time delay relay,Single pulse output relay,Cyclic relay f..

The REV-302 multi-functional relay is a microprocessor-based programmable device designed to energize/de-energize one or two loads within user-set time intervals based on the circuit voltage and the external photo sensor luminance. Specification:AC voltage (terminals 7-..

Programmable multifunctional timer. Timer REV-303 is a microprocessor-based programmable device designed to control the loads in real timewithout permanent maintenance with minimal expenses and maximal electricity saving.Timer REV-303 can be used to switch on the heatin..

KL3-SS-Z Stainless Steel Safety Switch with RFID Coding and OSSD OutputsThe KL3-SS-Z is part of the new Z-Range intelligent series of safety products. They have been designed to incorporate high anti tamper RFID coding and maintain PLe safety rating, even when connected..

KPF RFID Coded Non Contact Safety Interlock SwitchIDEM’s coded RFID non-contact safety interlocks are designed to conform to IEC 60947-5-3 and be used as directed by ISO12100, ISO14121 and ISO14119. They are available in two coding types: Master or Unique.The KPF featur..

RM-Ex Explosion Proof Stainless Steel M30 Safety InterlockIDEM’s RM-Ex Explosion Proof Non Contact Switch is manufactured with a stainless steel, M30 x 1.5mm threaded body making it suitable for industry applications where the threat of explosion exists, particularly in..

Relay control the maximum current. RMT-101 designed to permanent control of active value current of single-phase load in 0 to 100A range,and to turn OFF it in case of excess of user adjusted maximum allowed load current (with independent timelag) with preset cut-OFF tim..