Relays

Emergency stop relay NST-3.2Small emergency stop relay for monitoring of emergency stop and other safety arrangements.Can also be used as an inexpensive extension module, when additional output contacts are needed.Features:Safety category 3 (PLd) 3 NO safe outputs1 NC s..

Emergency stop relay NST-3.2Small emergency stop relay for monitoring of emergency stop and other safety arrangements.Can also be used as an inexpensive extension module, when additional output contacts are needed.Features:Safety category 3 (PLd) 3 NO safe outputs1 NC s..

Emergency stop relay NST-3.2Small emergency stop relay for monitoring of emergency stop and other safety arrangements.Can also be used as an inexpensive extension module, when additional output contacts are needed.Features:Safety category 3 (PLd) 3 NO safe outputs1 NC s..

Single phase power limiter OM-110 (hereinafter OM-110). OM-110 is designed for the continuous control over activeor total power capacity for the single phase loads. Measured range is from 0 to 20 kW or from 0 to 20 kVA. Thefunction of OM-110 is to cut off the power load..

OM-310 power limiter is designed for the following applications: load protection at poor parameters of the mains;complete load cutoff in case if watts input exceeds the main threshold within the user-set time period;partial load cutoff in case if watts input exceeds the..

Universal automatic electronic phase switch PEF-301. Switch is designed to supply industrial and household appliance single-phase 220V/50Hz loads from three-phase four-wire mains 3x380+N with the purpose of maintaning uninterrupted power supply of essential single-phase..

The Novatek REV-201M is designed for the timed switching of either 240V / 50Hz AC or 24-100V DC electrical circuits. It has 2 independent channels. Each of which can operate in 4 modes with user presets:Switch on time delay relay,Single pulse output relay,Cyclic relay f..

The REV-302 multi-functional relay is a microprocessor-based programmable device designed to energize/de-energize one or two loads within user-set time intervals based on the circuit voltage and the external photo sensor luminance. Specification:AC voltage (terminals 7-..

Programmable multifunctional timer. Timer REV-303 is a microprocessor-based programmable device designed to control the loads in real timewithout permanent maintenance with minimal expenses and maximal electricity saving.Timer REV-303 can be used to switch on the heatin..

Relay control the maximum current. RMT-101 designed to permanent control of active value current of single-phase load in 0 to 100A range,and to turn OFF it in case of excess of user adjusted maximum allowed load current (with independent timelag) with preset cut-OFF tim..

RN-101M voltage monitoring relay. The RN-101M voltage monitoring relay is designed to de-energize an industrial/appliance single-phase 220V/50Hz load in case of inadmissible voltage variations in the mains with subsequent automatic re-energizing after the circuit parame..

The RN-102 single-phase voltage monitoring relay. The RN-102 voltage monitoring relay is designed to de-energize an industrial/appliance single-phase 220V/50Hz load in case of inadmissible voltage variations in the mains with subsequent automatic re-energizing after the..