Menu
Your Cart

GW-7434D CR

GW-7434D CR
GW-7434D CR
GW-7434D CR
2-3 weeks
GW-7434D CR
GW-7434D CR
GW-7434D CR
GW-7434D CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: GW-7434D CR
2 099,52 zł

Industrial Modbus TCP server to DeviceNet master converter.

The GW-7434D is an economic solution that provides a communication protocol transformation between the DeviceNet protocol and the Modbus TCP protocol. This module solves the problem to connect an existing DeviceNet network to the Ethernet-based PLC, HMI or SCADA for setting up a control or monitoring system. Different to the GW-7243D, the GW-7434D offers the Predefined Master connection Set function and Group 2 only Server function as a DeviceNet master, and enables accessing the DeviceNet slaves automatically and cyclically. If the PLC, HMI or SCADA would like to access the DeviceNet slaves and simultaneously communicate with the Modbus slaves or COM-based devices connected with the RS-232 or RS-485 port of the GW-7434D, the GW-7434D can be the Modbus TCP server or VxComm server to exchange the data with those devices.

Features:

  • Programmable DeviceNet Master MAC ID
  • Programmable DeviceNet transfer-rate 125K, 250K, 500K
  • Supports maximum DeviceNet devices up to 63
  • I/O Length: 128 bytes max. (Input/Output) per slave
  • Supports I/O Operation Mode: Poll, Bit-Strobe and Change Of State/Cyclic
  • Supports on-line adding device into and removing device from network
  • Converters single Mobbus/TCP to multi Modbus/RTU, setting by Utility
  • Supports VxComm technique for every COM ports of controllers, setting by Utility
  • Allowed multi-client (or master) access simultaneously
  • Support "Set/Get Explicit Message" methods via Modbus TCP/RTU command
  • Supports Modbus RTU to DeviceNet master, setting by Utility

Manufacturer's warranty: 12 months


General technical parameters
Ethernet 1x 10/100BaseT(X)
CAN ports 1x CAN
Serial port 1x RS-232, 1x RS-485
Protocol support Modbus RTU, Modbus TCP, DeviceNet
Industrial grade
Optoisolation 1000VDC
Operating temperature -25°C to 75°C
Input voltage 10~30VDC
Mount DIN rail

Write a review

Note: HTML is not translated!
Bad Good

We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!

We use cookies to offer you the best experience on our site. By continuing to browse the site, You are agree to use cookies.