3-4 days
Industrial DeviceNet Slave to Modbus RTU Master converter, housing type A (slim), DIN rail mount.
HD67141 allows you to connect some Modbus slaves with a DeviceNet Master (like an ABB PLC). Converter is easy to configure thanks to free SW67141 software.
Configuration:
Thanks to the SW67141 software on your PC you can:
- Define the parameters of Modbus line
- Define the parameters of DeviceNet line
- Define the read/write registers
- Update the Firmware and/or the Project
Characteristics:
- Up to 455 bytes in reading and 455 bytes in writing on DeviceNet side
- Electrical isolation between two buses
- Bi-directional information exchange between the DeviceNet bus and Modbus
- 35mm DIN rail mount
Specifications:
- Ports: 1x RS-232; 1x RS-485; 1x CAN
- Connector: Terminal Block
- Data Rates Modbus: Up to 115200 bps
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67141
- ORDER CODE: HD67141-A1
Configurator - Software SW67141 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-232, 1x RS-485 |
Protocol support | DeviceNet, Modbus RTU |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~19VAC, 8~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!