3-4 days
Industrial Ethernet to multi mode fiber optic converter, point to point & single loop connection, DIN rail mount.
Point-to-Point connection between two devices/networks over optical fiber. Optimal solution to cover a long distance, isolate the two sides and when there is the necessity to pass near noise sources (engines, inductive loads, etc.).
Single Loop connection between more converters. This solution is ideal where there is the necessity to connect/isolate over optical fiber different brenches/devices of existing systems.
Configuration:
Thanks to the SW67701 software on your PC you can:
- Define the parameters of Ethernet line
- Define the I/O map (if I/O module is present)
- Update the device
Characteristics:
- Triple isolation between Ethernet - Power Supply, Ethernet – Optic Fiber, Power Supply – Optic Fiber
- Bi-directional information exchange between Ethernet and Optic Fiber
- Mountable on 35mm Rail DIN
Specification:
- Ports: 1x Ethernet; 1x Optic Fibers
- Data Rates Ethernet: 10/100 Base-T Autosensing
- Ethernet connector: RJ45
- Optic Fiber connector: SFP (LC connector included)
- Power supply: 9...19VAC; 12...35VDC
- Operating temperature: -40°C to +85°C (-40°F/+185°F)
- Dimensions: 71 mm x 60 mm x 95 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67701
- ORDER CODE: HD67701-E-0-D5M
Configurator – Software SW67701 FREE DOWNLOAD
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
Fiber mode | Multi-mode |
Fiber | 1x 10/100Base (SFP) |
Protocol support | Ethernet |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 9~19VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!
Tags:
hd67701
, ethernet
, mediaconverters
, fiber
, HD67701-E-0-D5M
, to Ethernet (Mediaconverters)
, to Fiber