3-4 days
Industrial CAN to Modbus Master converter, housing type: A (slim), DIN rail mounting.
HD67511 allows you to connect some Modbus Slaves with an existing CAN network. Converter is easy to configure thanks to free SW67511 software.
Configuration:
Thanks to the SW67511 software on your PC you can:
- Define the parameters of CAN line
- Define the parameters of Modbus line
- Define the CAN frames that the Converter can accept to read the information from the Modbus Slaves
- Define the CAN frames that the Converter can accept to write the information to the Modbus Slaves
- Update the device
Characteristics:
- Up to 500 CAN frames in reading and 500 CAN frame in writing
- Triple isolation between CAN - Power Supply, CAN - Serial, Power Supply - Serial
- Bi-directional information exchange between CAN bus and Modbus bus
- Mountable on 35 mm DIN rail
Specifications:
- Ports: 1x CAN; 1x RS485
- CAN connector: 3way 5mm terminal block
- Modbus connector: 3way 5mm terminal block
- Data Rates CAN: Up to 1 Mbps
- Data Rates Modbus: Up to 115200 bps
- Power supply: 8...24VAC; 12...35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67511
- ORDER CODE: HD67511-A1
Configurator – Software SW67511 FREE DOWNLOAD
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-485 |
Protocol support | CAN, Modbus RTU |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!