3-4 days
Industrial CAN to WiFi coverter, housing type A (slim), DIN rail mount.
HD67644 allows you to connect some CAN devices with an Ethernet net (for example a PC, Supervisory System, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67644 software.
Configuration:
Thanks to the SW67644 software on your PC you can:
- Define the parameters of CAN line
- Define the parameters of Ethernet line
- Select the working mode (Server Mode or Transparent Mode)
- Define a list of Receive COB (if you use the Server Mode)
- Update the Firmware and/or the Project
Characteristics:
- Mountable on 35 mm DIN rail
- TCP/UDP Ethernet protocols changeable with software
- Bi-directional information exchange between Ethernet and CAN bus
- Electrical isolation between two buses
- Microprocessor for data control
Specifications:
- Ports: 1x Wi-Fi; 1x CAN; 1x USB (programmation port)
- Data Rates CAN: Up to 1 Mbps
- Data Rates Wi-Fi: 802.11b/g standard
- CAN connector: 3 way 5mm terminal block
- Wi-Fi connector: SMA Female Antenna
- CAN Protocol: CAN 2.0A and CAN 2.0B
- Wi-Fi Protocol: TCP or UDP
- Power supply connector: 2way 5mm terminal block
- Power supply: 8~19VAC; 8~35VDC
- Operating temperature: -40°C to 85°C (-40°F to 185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67644
- ORDER CODE: HD67644-WiFi-A1
General technical parameters | |
CAN ports | 1x CAN |
Protocol support | CAN, WiFi |
Wireless | |
WiFi | 802.11 b/g |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!