3-4 days
Industrial CAN to SNMP agent converter, housing type A (slim), DIN rail mount.
HD67155 allows you to connect some CAN devices with a SNMP Manager (for example a PC, Supervisory System, etc) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67155 software.
Configuration:
Thanks to the SW67155 software on your PC you can:
- Define the parameters of SNMP line
- Define the parameters of CAN line
- Define the CAN frames that the converter can accept
- Define the CAN frames that the converter sends through the CAN line
- Define the map of CAN byte that must be written in the SNMP array
- Define the map of which SNMP bytes must be written in CAN frames
- Update the device
Characteristics:
- Up to 1024 bytes in reading and 1024 bytes in writing
- 35mm DIN rail mount
- Bi-directional information exchange between CAN bus and SNMP bus
- Triple isolation between CAN - Power Supply, CAN - Ethernet, Power Supply - Ethernet
Specifications:
- Ports: 1x CAN; 1x Ethernet
- CAN 2.0 connector: 3way 5mm terminal block
- SNMP connector: RJ45
- Data Rates CAN: Up to 1 Mbit/s
- Data Rates SNMP: 10/100 MHz Autosensing
- Power supply: 8~24VAC; 12~35VDC
- Operating temperature: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm (DxWxH)
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67155
- ORDER CODE: HD67155-A1
Configurator - Software SW67155 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
Ethernet | 1x 10/100BaseT(X) |
CAN ports | 1x CAN |
Protocol support | CAN, SNMP |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~24VAC, 12~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!