3-4 days
Industrial DeviceNet Master to Modbus RTU Slave converter, housing type A (slim), DIN rail mount.
HD67151 allows you to connect a DeviceNet network with a Modbus Master (for example a PLC, HMI, etc.) in order to exchange the informations between the networks. Converter is easy to configure thanks to free SW67151 software.
Configuration:
Thanks to the SW67151 software on your PC you can:
- Define the parameters of Modbus
- Define the parameters of DeviceNet
- Define the read/write registers
- Update the Firmware and/or the Project
Characteristics:
- Electrical isolation between two Buses
- 35mm DIN rail mount
- Bi-directional information exchange between Modbus and DeviceNet bus
Specifications:
- Ports: 1x RS-232; 1x RS-485; 1x CAN
- Connector: Terminal Block
- Data Rates Modbus: Up to 115200 bps
- Power supply: 8~19VAC; 8~35VDC
- Operating temperatur: -40°C to +85°C (-40°F to +185°F)
- Dimensions: 120 mm x 23 mm x 107 mm
- Weight: 200g approx
- Mechanical fixing: DIN Rail mount
- Software: SW67151
- ORDER CODE: HD67151-A1
Configurator - Software SW67151 FREE DOWNLOAD
Manufacturer's warranty: 24 months
General technical parameters | |
CAN ports | 1x CAN |
Serial port | 1x RS-232, 1x RS-485 |
Protocol support | DeviceNet, Modbus RTU |
Industrial grade | |
Operating temperature | -40°C to 85°C |
Input voltage | 8~19VAC, 8~35VDC |
Manufacturer's warranty | 24 months |
Mount | DIN rail |
1
We know that choosing the right product can be difficult. Get a free consultation with a technical expert and make the right decision!