Menu
Your Cart

ECAT-2511-B CR

ECAT-2511-B CR
ECAT-2511-B CR
ECAT-2511-B CR
Warranty 12 months 2-3 weeks
ECAT-2511-B CR
ECAT-2511-B CR
ECAT-2511-B CR
ECAT-2511-B CR
  • Stock: 2-3 weeks
  • Brand: ICPDAS
  • Model: ECAT-2511-B CR
1 649,70 zł
2 pieces or more 1 600,21 zł
5 pieces or more 1 550,72 zł
10 pieces or more 1 501,23 zł
26 pieces or more 1 451,74 zł
51 pieces or more 1 402,25 zł
A proven choice for industrial installations.
Ask for compatibility and model selection.
Register and get cheaper offers today.

Full design package: User manual, CE declaration, CAD, PDF, certificates and test reports

If you're preparing technical documentation or an installation design, you can receive a complete set of design materials for this model. This is a quick way to gather the required documents for audits, acceptance, or project documentation.

  • Device User Manual
  • CE Declaration of Conformity (EU Declaration of Conformity)
  • Mechanical DrawingsCAD (STEP/DWG) or high-quality PDF
  • Additional Certificates (if available for the model)
  • Test Reports (if available for the model)
Request a package: User manual, CE declaration, CAD, PDF, certificates, test reports

EtherCAT Single-Strand Media Converter, TX 1550 nm, RX 1310 nm, SC connector.

The ECAT-2511-A and ECAT-2511-B are EtherCAT to single-mode fiber optic converter. They are designed not only to convert EtherCAT signals to optical signals on a fiber optic cable, to reshape the EtherCAT signal to compensate for distortion, but to isolate the bus error due to the wire short or disturbance. With the advantage of fiber optic, the ECAT-2511-A and ECAT-2511-B enable secure data transmission via fiber optic transmission, and helps the EtherCAT network to prevent the noise from EMS/RFI interference.

Features:

  • Powerful MCU handles efficient network traffic
  • Distance between Stations up to 15 km (100BASE-FX)
  • 50% Cost Saving for Fiber Optic Infrastructures
  • EtherCAT conformance test tool verified
  • ESD Protection 4 KV Contact for each port

Manufacturer's warranty: 12 months


General technical parameters
EtherCAT1x EtherCAT
Fiber modeSingle-mode
Fiber1x 10/100Base-FX
Protocol supportEtherCAT
Industrial grade
Operating temperature-25°C to 75°C
Input voltage12~48VDC
MountDIN rail

Write a review

Note: HTML is not translated!
Bad Good
1